Handling air to SAIVER, is as natural as breathing.SAIVER has been
manufacturing high quality Air Handling Units for almost half of a
century. The Series A1 Air Handling System is the culmination of
experience over the years together with continuing improvement
through Research and Development. SAIVER Air Handling Units
incorporate the 'finely tuned, value engineered cost effective
design aided by computer coupled with human ingenuity.
The superior quality of the series A1 have also been recognized by
the world, including the certification of EUROVENT.
SAIVER team comprises of highly experienced Engineers and
Technicians totally committed to produce one of the finest Double
Skinned Air Handling Units range in the World to meet the
requirements of most demanding Cost and Quality conscious customer.
SAIVER has kept pace with the time and has always been ahead of its
competitors. With automized production (directly from selection
program), SAIVER manufactures CUSTOM-MADE units economically,
efficiently and quality assuringly. SAIVER units incorporate the
finest corrosion resistant materials, such as Stainless Steel,
Marine Aluminium Alloy and Copper to ensure long years of trouble
free operation in the most adverse conditions.
SAIVER unique frame design has inherent strength stability. The
modular framework utilises a corrosion resistant, extruded marine,
aluminium alloy, patented twin box section with True Thermal Break
Construction. The entire module is subsequently mounted on a heavy
sectional aluminium alloy or galvanized steel channel base.
Standard 30mm or 60mm thick infill panels are of double skinned
construction from pressure injected polyurethane foam insulation
with 'k' value of 0.02Watts/m°C and density 40kg/m3, sandwiched between galvaized steel with optional preplasticised
or pre-painted finish, PRE- ALUMAN and stainless steel sheet is
Filter, Coils, Air Washers and Fan Sections requiring regular
maintenance and inspection, have hinged or fully removable access
panels. These are fitted to the frame with easy release, half-turn
nylon handles and cam locks. Handles can be operated internally for
additional safe Hinges are of heavy duty, load-bearing design with
stainless steel pivot. Other panels can be detached, if necessary
for access by removing screws with simple hand tools.
Inlet Section / Mixing Box
Plenum completed with dampers are specifically designed to minimize
the stratification of entering air streams for maximum efficiency.
Dampers are assembled within a rigid extruded aluminium frame,
flanged and pre-drilled for easy fitting to connecting ductwork.
Dampers are opposed blade type and available in both flat and
double skinned aerofoil sections.
Blades are formed from extruded aluminium with edge interlocks.
Gaskets are provided to minimize leakage of air.
Coils are computer selected to obtain optimum psychometric
efficiency with low air and water pressure drops. Chilled water,
dire expansion, hot water and steam coils are constructed from
copper tubes, mechanically bonded to aluminium fins as standard.
Other fin materials are available including vinyl coated aluminium,
copper, tinned copper and galvanised steel. For corrosive flow
media, stainless steel tubes and fins are available as an option.
The coil assembly completed with carbon steel, copper or stainless
steel headers is located within the coil section on aluminium
support for easy withdrawal from either side.
On Site Assembly
The lightweight construction material and modular nature of the
units make them particularly suitable for lifting and maneuvering
in difficult or confined locations.
Modules can be easily aligned on site and locked together by sturdy
stainless steel bolts, located in factory pre-drilled assembly
holes. Continuous gaskets between each section ensure an airtight
seal and thermal insulated. All fixings and gaskets are concealed
within the unit.
Fully sealed filter sections are designed for easy withdrawal and
renewal of filter cells and, are constructed to house any type of
primary or secondary filters of different media with varies
efficiencies. In areas of particular importance, such as hospitals
and clean rooms, absolute filters can be provided to ensure safe
human and machine environments.
Fan and Motor Section
SAIVER manufactured fans form the heart of all systems. Forward
curved or backward curved non-overloading aerofoil centrifugal fans
are available with various outlet configurations. All fan wheels