USB-QC30R2:USB/RS232 interface,cable for Mitsubishi Q PLC
USB/RS232 connector,cable for Mitsubishi Q PLC,3 meters.
USB-QC30R2 is the programming cable in which USB interface provides
both the serial connection and RS232 signal conversion. Under the
control of computer-driven driver, the programming cable makes it
possible for the computer's USB interface to simulate the
traditional serial (known as COM interface), thus various existing
programming software such as communications software, monitoring
software and other applications can be normally used. The working
power supply of this cable is directly from the USB port, but not
the PLC programming interface. The two-color LED on the converter
box indicates data’s transceiving status.
USB-QC30R2 is applicable to Mitsubishi Q series PLC (Q mode)
USB-QC30R2 principle and figure structure:
USB-QC30R2 programming cable simulate USB port as traditional
serial port (usually COM3), which enables existing programming
software(GX Developer) to communicate through simulated traditional
port and PLC devices.
Features and technological index:
● Support USB-QC30R2 operating system: Windows2000/XP
(WinNT4/95/98/Me/DOS not included )
● Support USB-QC30R2 programming software version: GPP V4.0, GX
Developer V7.0 and above
● Fully compatible with USB 2.0 standard
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard
● Support UART data format: data bits: 7-8; stop bit: 1, 2;
check-bit: odd / even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃
● Cable length: 3 m; Color: black
USB device drivers should be installed before using
USB-QC30R2programming cable. After completing Driver installation,
the corresponding COM port for the USB-QC30R2 programming cable
will be displayed in the “Device Manager” of Window. The step next
is just to choose this COM port in the programming software and
other application software and keep other communication parameters
as in the Default settings. And the following steps are exactly the
same as in the traditional programming cables with RS232
USB-QC30R2 programming cable does not support long-distance
communications. For long-distance communications, RS232 long-term
drive can be chosen, (8-wire system, model: SC-232E).
Please Note: USB interface cable cannot be extended.
E-Mail:sales at chinaplccable.com
If any problems, please feel free to contact us!