• Faster diagnostics operation system: equipment leading the ARM
• Fast and stable system applications: advanced and comprehensive
diagnostic software management platform.
• 8-inch touch screen, colour fidelity, visual and more comfortable
• Built-in high-performance, overvoltage protection circuit, to
improve product reliability
• Storage and playback of test data and pictures
• Bluetooth VCI Diagnostic box: Host and run independently of the
VCI box, built-in Bluetooth module, the wireless communication.
Supports both wired communications, the use of flexible
• Unique VCI self-test function
The VCI Diagnostic Box is the core interface for the mainframe to
communicate with vehicles.
It provides 2 method of connection.
1.Cable ConnectionCable Connection
With one end connect to the mainframe and the other end connect to
the vehicle diagnostic socket,
VCI is the bridge for communication between the mainframe and
vehicle. The VCI diagnostic box
have two ports, a DB15 port and a OBD II port. Use the main cable
to connect the interface DB15
to the mainframe and the OBDII interface can connect to the
adaptors (Does not need adaptor for
connect to vehicle with OBD II diagnostic socket).
2.Bluetooth Wireless Connection
VCI diagnostic boxes is with a built-in Bluetooth communication
module, by switch in the
mainframe setting menu from 'online diagnosis' to 'wireless
diagnosis'. The mainframe will
communicate with the VCI box by Bluetooth. Not necessary to use the
1. Basic Function
1.1 Retrieve ECU information
In some electronic control system it is displayed as "system
identification" or "System
Information". This function is to read ECU version information,
engine model, part
number and date of manufacture and other information.
1.2 Read DTC
1.3 Clear DTC
1.4 Read Data Stream
1.5 Actuation Test
The PS2 read fault codes from the ECU fault memory, and analysis to
failure of the vehicle according to the contents of the fault
The fault code can only be cleared after fix the problem on the
vehicle. The fault can't be
cleared if the problem exist with the vehicle.
Get real time data of all the sensors in the electronic system, by
compare the real
time data with the specs, problems can be easily determined.
Purpose:To send actuate signal to the sensors and check if the
to the request, problem will be determined if the sensor do not
respond. The main
actuator for actuation test:
( 1) fault light: to determine whether there is fault with the
engine and circuits.
( 2) cold start light: The electric heating devices. In the
environment at low
temperatures ( 0 degrees Celsius) , the intake air temperature
sensor sensing the
temperature of the inlet, when the temperature is below 0 degrees
heating indicator light on and the engine ECU controls the heating
relay controller work
installed in the engine intake manifold through the heated inlet
flange of the fence on the
heating, the heating time depends on the inlet temperature, after
heating the heating
instructions light off, then the engine could be started.
2. Special Function Explanation(Varies from model to model)
1) Oil Reset: Reset the Oil Maintenance Light on the dashboard
after replace engine
2) SAS reset:The SAS system need to be re- programmed after change
the airbags or
3) Throttle adjustment: after power outages, disassembly throttle
control unit, replace the throttle control unit, the replacement of
the engine and replace the
engine control unit. , throttle must be adjusted.
4) Mileage Reset: Reset the number of total vehicle mileage.
5) EEPROM access: PCM with EEPROM, re- program with an external
through a terminal interface.
1. Diagnostic Software.
1.Read DTCs/ 2.Clear DTCs/ 3.Read Live Data/ 4.Read ECU system
Asia Cars: KIA, Hyundai, Holden, ISUZU, TATA, MARUTI,
MAHINDRA, Honda, TOYOTA, HONDA, MITSUBISHI,
SUBARU, SUZUKI, MAZDA and NISSAN, Cherry,
Europe car: Benz, BMW, VOLVO, RENAULT, PEUGEOT,OPEL,
2. Maintenance light reset (Oil Reset Tool)
1.Vehicle Inspection/ 2.Engine oil/ 3.Front & Rear brake/
4.Dust filter/ 5.Spark plug/
Land Rover Defender(1993-1995&1997)/Discovery(1994-1999)/
DiscoveryⅢ(2005-2009)/Range Rover (2007-2009)/
Range Rover (2002-2007)/R75-Engine oil-Inspection-Time/Freelander
Mercedes-Benz A- CLASS,B-CLASS,C-CLASS,CLK,E-CLASS,CLS,S-CLASS,CL
GL-CLASS, VITO, VIANO, Sprinter
3. Key Programmer & G2, G3 Immobilizer System Programmer
1. New keys programming/ 2. Vehicle Identification Number
3. Reset ECU & Reset immobilizer/ 4. New remote controller
Europe: Seat/ Skoda/ VW/ Porsche/ Peugeot/ Citroen/ Audi
America: GMC/ Chrysler/ Chevrolet/ Cadillac
Japan & Korea: Subaru/ Toyota/ Nissan/ Mitsubish/ Mazda/ Lexus/
Kia/ Infiniti/ Hyundai/ Honda/ Acura
China: Roewe/ liuFeng/ LiFan/ JAC/ HuaPu/ HaFei/ GreatWall/ Geely/
DFLiuzhou/ Chery/ ChangHe/ ChangFeng/ ChangAn/
4. The replacement of EPB brake pad supports for the following
VW (R36,CC,Magotan etc.) /Audi (A4L, A6L, Q5 etc.)/Seat/Skoda
5. Tire pressure warning light reset (manual operation)
6. Timing Belt Light Reset (manual operation)