PTFE Micro Powder as additive to thermoplastics, lubricant and
Typical properties (not for specification purpose)
|Grade||Appearance||Average Particle Size, um||Bulk Density, g/l||Specific Gravity||Melting Point,OC||Applications|
|CGUF 201||White powder||4||250 +/- 20||2.2||333|
* Addtive to lubricants, greases
* solid lubricant
* additive to sticky & wear resisting varnish
* additive to dry battery
As one of additives to thermoplastics, thermoset plastics, and
Being added in PC, POM, PA, PPS, ABS, PS, HIPS, PP, thermoset
plastics and elastomers ( EPR, silicone rubber, SBR etc.), it could
obviously reduce the attrition to the sliding parts, and the
friction coefficient of the base substance.
Recommended usage: 5~25.0 % (by wt.)
As one of additives of lubricants & greases.
1.Used as an ingredient, to formulate lubricating systems
respectively used under lower load at lower rpm, under medium load
at medium rpm, and under heavy load at high rpm.
Recommended usage: 0.5~7.0 % (by wt.)
2.Being added into lubricating oils and greases to improve the
lubricating performance under high pressure, and as well to
increase the viscosity of the base oils.
Recommended usage: 0.5~40.0 % (by wt.)
As one of the additives of printer's inks.
It's anideal additive and modifier to various kinds of printer's inks that
achieves anti-sticking, less abrasion, improved definition and
luster of the prints, durability against fading, good water-proof
and moth-eaten proof, etc.. Its application in hectograph / gravure
inks improves slippery performance, surface smoothness, luster and
abrasion resistance that facilitates high-speed printing.
Recommended usage: 0.1 ~ 3.0 % (by wt.)
As an additive of paints.
Could be mixed with paints to be used in spray coating of
industrial equipment, household goods, or used in anti-corrosion
paints, special waterproof paints, and coating of wound metal
strips providing benefits of anti-stickiness, flexibility, heat
conductivity, durability and toner resistance etc.
As an additive of anti-sticky and wear-resisting varnish.
To improve the varnish's properties of anti-sticky, lubricating,
anti-corrosion, moisture-proof and wear resistance, also reduce its
As an solid lubricant.
1.Being added into rubbers and plastics, it could not only avoid
sticky-sliding during processing, but also gives the base materials
with many excellent properties of PTFE. It is also a quite
effective mould-release agent for rubbers and plastics when the
powder being mixed in at 0.25% by wt.
2.Used as a lubricant for gearing system in the circumstances that
requires oil-free lubrication, such as high-speed engines, gearing
system, and kneading machine,etc.
3.Added in oils, lubricating oils and rubber sealant to
significantly improve their load-bearing capability, vacuum
resistance, low temperature resistance and wear resistance.
Anti-sticky and wear-resistant spray
A spray could be made by mixing it with methane and butane to make
the sprayed base substances with improved adhesion resistance and
An additive to dry battery
Used in dry battery to substitute PTFE dispersion. It can elongate
the life of the battery, simplify the production technics and
lowdown the cost