Jewelry Stainless steel Plastic Fiber Laser Engraving Machine 20W
Embossing plate fiber laser marking machine ,optical mini portable fiber laser marking machine,high precision mini portable fiber laser marking machine,It can engrave and mark on the surface of many metal and
non-metallic ,widely used in the marking of below area :industrial
bearings,gear,various automobile components,hardware
tools,aerospace components,IC chip,computer
accessories,watch,electronic and communication products,wire and
cable,food package,jewelry etc .
Fiber laser engraving machine :
1.High electro-optic conversion efficiency;
2.Low power consumption, stability laser output;
3.High quality beam, consumable free,small machine dimension ;
4.Smaller output laser beam , finer marking line.suitable high
Leadboom Machine Factory Promise:
1:All machine 1Year guarantee!
2:After get the machine accept 7 days return the goods!
|Laser types||Fiber laser generator|
|The average output power||10W/20W/30W/50W|
|Standard marking area||110*110mm(Option:200*200/250*250/300*300mm)|
|Min Linear Width||0.01mm|
|Computer Operating System||Win98/Win2000/XP|
|Cooling system||Air cooling|
|Power Supply||220V/ 50HZ-60HZ/15A|
|Laser Module Life||>100000hours|
Standard Accessories (Fiber Laser engraving Machine)
Germany IPG or China Raycus
Galvo tech Scanner
A semiconductor module
A set of high-speed vibrating mirrors
A set of marking control system
A set of laser marking sysytem
An industrial computer
A marking work table
A red laser pointer
A pedal switch
A set of marking software
A "Instruction Book", "Operation Manual" and "Training Video”
Samples of laser engraving machine
Parts of laser engraving machine
- a. Using the third generation of optical fiber solid laser, the
electro-optical onversion ecfficiency of pump light source can
reach to 80% after fiber coupling. Higher beam quality, long use
time, laser life can reach 100000 hours(Lamp pump YAG is around
hundreds of hours, semiconductor is around 10000 hours).
- b. Perfect beam quality achieved the highest and excellent marking
effect. And it has great advantages of doing
anti-white,matte,chromatic...on the stainless steel.
- c. Adopted imported high-speed scanning head, and combined with
software makes engraving very fast, so the processing speed is 3 to
5 times quicker than the ordinary YAG and DP semiconductor.
- d. Air-cooling, no consumables, free maintenance, save power and
energy(total power is 500W), low cost of latter usage, the annual
electric savings would be around USD3000-5000.
- e. High electrooptical efficiency: integrated electooptical
efficiency reaches above 20%, greatly saved power consumption and
- f. Absolutely environmental marks without intermediate mediators
involved in processing, completely in conformity with ROHS
- g. Integrated modularization design, convenient maintenance, and
the small volume can save more space.
- h. Support JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG,
TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW and other
documents, and can form the serial number,production date, bar code
and QR code automatically.
- i. Optional rotary workable and other automated matching system.
Packing dimension: 900x780x800mm
Gross weight: 50kg
Whether you are a dealer/distributor/trader/agent or an end user, as long as you are interested in our laser machines
and related products, once you contact us, we will arrange a
particular professional at your service to help you have a deep
understanding of LEADBOOM LASER and our products or answer your questions on laser products
and laser applications. In order to keep open and convenient
communication with you, LEADBOOM LASER integrates sales and service as one and the same responsible
person is in charge of your sales and service.
After you confirm the order, we will figure out the delivery date
according to the model and production schedule. For general models,
we will arrange production in 7 days or so and we will notify you
of the exact production process.
Machine Case---Mechanical Parts Installation---Electrical Parts
Installation---Machine Commissioning--- Aging Test for at Least 24
Hours --- Nameplate, Logo and Packaging---Shipping
1. All of our machine will be fully-checked by our quality control department before the shipment. We
guarantee all of our laser machines have a one-year warranty
(quick-wear parts not included).
2. Training 1-2 technician with free.
3. Training details: operation principles, system and structure, safety and maintenance, software,
the processing technique, and so on.
4. Numerous feedback from our clients have proven that our laser
machines are stable in performance with rare malfunction. However,
we would like to handle it as follows once malfunction occurs:
a.We guarantee that we will give you a clear reply within 24 hours.
b. Customer service staff will assist and guide you to analyze the
malfunction in order to locate the cause.
c. If the malfunction is caused by improper operation on software
and other soft faults, we will help solve the problem on line.
d. We will offer plenty of online supports, just like detailed
technical and installation instructions by email, video, telephone.
Q: Do I need two laser machines to engrave and cut separately?
A: No, the laser machines we provide are capable of both engraving
and cutting. One machine alone can fulfill the two purposes.
Q: Do the laser machines need to be connected to a laptop or
desktop computer to work?
A: Yes, either is ok. It supports Windows 2000, Windows XP, Win 7
and other operating systems
Q: What kind of graphic format does it support?
A: JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,
PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW , etc.
Q: How to distinguish laser tubes with different powers and
A: 1. Laser tube length (relatively speaking, the longer, the
2. Laser tube diameter (relatively speaking, the thicker, the
3. The bigger a laser tube power is, the deeper the machine can
cut, but its light spot is bigger. So, it is better to use a
machine with a low-power laser tube to engrave, such as 40W, 50W or
Q: In general, how long is the service life of a laser tube?
A: Generally, a laser tube’s service life can reach 3500 hours to
9000 hours depending on the specific usage. For example, if it
works 8 hours per day, the detailed data is as follows:
1. If you set the power at 20-30% of the total power, the service
life is about 1-2 years.
2. If you set the power at 40-50% of the total power, the service
life is about 1 year.
3. If you set the power at 70-80% of the total power, the service
life is about 6-8 months.
Q: How can I tell the power of a laser tube has been exhausted?
A: The beam color of a new laser tube in operation is purple. When
the power is gradually depleted, the color will become white.
Q: Is it better to increase blow to improve laser processing
A: For some thick materials, it works. But, when carving some other
materials, you need to blow less.
Q: How long will it take to learn to operate a laser machine?
A: If you are able to use some basic graphic design software, it
will only take a few hours to master the operation. You just need
to do some simple tests on different processing materials to know
how to set the correct speed and laser power.
Q: Is a laser machine in operation harmful to our bodies?
A: It is not harmful as long as the laser is not exposed directly
to skin and eyes.
Dongguan Leadboom Photoelectric
Technology Co., LTD., is dedicated to
researching and developing laser equipments
and mass manufacturing for our customers
overseas since 2002.
And we have built long term strategic
partnerships with the COHERENT, SYNRAD,
II VI from the US, and MITSUBISHI, Panasonic
from Japan, and Rofin, IPG from Germany,etc.
Our main products including CO2 laser wire
stripping machine, fiber laser wire stripping
machine, fiber laser marking machine, CO2 laser
marking machine, CO2 laser cutting machine, laser
engraving machine, solid laser welding machine
series over 20 sets of laser equipment, etc.
Other models(laser marking machine and laser cutting machine)
Leadboom Laser, always at your service!