Full automatic small scale drinking mineral water filling
ABOUT THE PRODUCTION LINE
The series equipment is used in producing all kinds of water packed
with PET bottles. Washing, filling and sealing devices equipped on
the same machine. The design of the machine is scientific and
reasonable. The appearance is beautiful and the function is
complete. Its operation and maintenance is convenient. Its
automation is high.
The advanced technology. The speed of filling is fast and the
liquid amount is controlled accurately. The filling can be stopped
automatically when there is no bottle or bottles are damaged.
The advanced auto-washing technology is used in system. Pneumatic
valve and damped gears are used for bottle conveying, the noise is
low and the whole machine runs smoothly.
The magnetic torque is used for screw capping. The power of screw
capping can be adjusted without steps. The power of screw capping
can also be fixed, and the caps will not be damaged, the capping is
shortage of caps in the caps storage tank, an alarm signal will be
generated and the caps will be fed automatically.
The whole machine is controlled by PLC with touch-screen as the
interface between human and machine. The amount of the drinks in
the drink tank can be controlled automatically. The filling and
capping will be stopped automatically when there is no bottle. When
are cramped wrongly or when caps are not available, the machine can
be stopped automatically.
WATER FILLING MACHINE
Integrates bottle washing, water filling and capping into one
monobloc, and the three processes are carried out full
automatically. It is used in the filling of mineral water, pure
water, and other non-carbonated beverage. For electricial elements,
we use Mitsubishi, Omron, Schneider, Airtac, etc. which are famouse
brand and with assured quality. Each machine element that contacts
with the liquid is made of high quality stainless steel. The
critical components are made by numerically-controlled machine
tool, and the whole machine condition is under detection by
photoelectric sensor, no bottle no filling, no bottle no capping.
It is with advantages of high automation, easy operation, good
abrasive resistance, high stability, low failure rate, etc. The
quality reaches the international advanced level. It is the best
choice for new and old beverage production line investors.
MAIN TECHNICAL PARAMETER
|Production capacity||6000BPH 500ML|
|Rinsing water consumption||1T/H|
|Power||3ph, 380V/50Hz, 3KW|
|Overall size||2800*2000*2400 mm (L*W*H) mm|
★ With bottle neck clipping transmission structure, the bottle
conveyance is stable; very convenient and swift to use different
bottles for filling in the same machine by adjusting the height of
conveyor and several exchanging parts.
★ With ballance pressure filling theory,low temperature filling,
filling precision is high and the filling level is adjustable.
★ With spring type washing clipper, empty bottles are turned
180°along the guiding roll for inside rinsing; the washing nozzle
adopts plum blossom shape multiple holes to rinse the bottle
bottom, washing efficiency is high.
LIGHT INSPECTION UNIT
□ Light inspection box is covered with stainless steel, with
appropriate and comfortable light of national sanitary standard,
which can inspect clearly the impurity, defaults and grains.
□ Power of light pipe: 18W
□ Number of light pipe: 2pieces
AIR BLOWING DRIER
The fast flowing air from the blow of the high-pressure fan is
sprayed out of an aperture, to remove the remaining waters from
bottles to a high extent. The aperture is side-positioned to blow
all sides of bottles with fast flowing air.
Ventilator power: 7.5KW for each
Frame Material:304 Stainless steel
SLEEVE LEABLING MACHINE
|Label material||PET, PP, PE, PVC, OPS, etc.|
|Suitable bottle diameter||28-120mm|
|Suitable bottle height||150-320mm|
|Suitable bottle type||round type, elliptical type, square type, curve type|
Electrical Steam generator: 18kw
Main machine 2000x850x2000mm(LxWxH)
Tunnel size: 1800x400x1700mm(LxWxH)
Warranty : One year from the date from the date of Installation or
acceptance of the Plant whichever comes first.
Free Spare Parts : Digital instrument, Sealing, Stretching cylinder seal ring,
Mould-adjustment wrench, Furnace temperature table, Furnace heating
tube and other relative vulnerable part .
Installation : Experts’ team to buyer’s country after confirmation that the goods
arrived in site and civil works completed get ready for
installation. Funds for trip need to be payed by client and extra
salary $50/day during the engineer’s journey.