skin cold air cooling machine, cold air device for ipl laser diode
co2 fractional laser nd yag system
Treatment details attention :
After recieve the package , pls keep the package alone about 3
hours at one place , and then start to operate it .
After turn on the machine , set wind speed between level 1 and
level 2 , it need around 10 minutes let the tempreture cooling down
to around -18 degree , and then set wind speed between level 4 and
level 5 , and then start to do do skin cooling .
Pay attention , in order to ensure the safety , pls dont not let
the cooling handle treat one same area more than 1 minutes , it is
better move it from one area to another area , can not do always
stay one same area .
The professional skin cooling machine is specially for cooling skin
before, during and after using of non-invasive CO fractional laser
, Q switch laser, IPL or diode laser treatment ; pain release for
patients to avoid any burn or uncomfortable treatment ;
1 . It can produce continuous cooling wind to target tissue to
minimize pain and thermal injury during laser and ipl treatment ,
provide temporary relief for cosmetic injections ;
2 . Wind speed (cold air) and cooling time can be adjusted from
level 1-7 and cooling time 1-60 minutes on screen according to
patient’s comfort ;
3 . The cooling level can be up to -20 degree , so in actual
therapy laser or ipl can use high power to perform high efficient
and fast treatment ;
4 . Use large 8 inch touch screen to indicate all treatment
parameters , Fexible to operate, no consumables or additional costs
, fashionable , economic and professional ;
It is designed for reducing pains, redness, swelling and thermal
damages caused by laser treatment such as 808nm Diode laser ,
Nd.yag tattoo removal laser , long pulsed hair removal laser , CO2
laser , long pulse light ( IPL ) treatment and Radio frequency ( RF
) treatment , Suitable for all machines if patients feel pain and
needs cooling .
easy mode operation screen
-4 to - 20 degree
Machine package :
All machines with shockproof Carton package .
Warranty & After-sale Service & Training
A . 2 years ex factory under normal and Correct operation ; free
labor and material but without consumables parts.(since our great
confidence of our machine’ s excellent quality
B . In order to give clients more satisfied products experience,
the stuff with rich experience of laser beauty and medical
knowledge, and they work in this area for 2-5 years. And for our
after-sales department , they work for 7 days for a week and 18-24
hours a day to ensure the 24 hours on line service .
C . There is a copy user’s manuals and clinical treatment guider
for detailed instructions on the introduction, the operation , the
maintenance , etc .
D . There is a comprehensive training last for 5-7 days through
email , vedio ,on line service , including how to operate ,
maintenance and adjust the treatment parameters for different
treatments , etc .