Steel shot and Steel grit , Cast steel shot abrasives Reach SAE
Steel Shot is produced by means of a melting process and
subsequently reshaped into spherical grain particles. Tis
austenitic microstructure guarantees its long service life. It is
used where ferritic residue (rust film, coloration) needs to be
Steel shot blasting media is the most widely used abrasive for
cleaning, stripping and improving a metal surface. Steel Shot is
used for cleaning, descaling, surface prep and shot peening. The
grade or size of steel shot will determine the ultimate finish
achieved on the surface of the metal. The round ball shape of the
steel shot produces a clean, smooth and polished surface through a
peening action created by the acceleration of the shot. Generates a
high-impact force to clean and peen heavy forgings and remove
heat-treated scale on steel and other cast metals.
Steel Shot and Grit can be used separately, or as a mix, in wheel
blast machines or blast rooms to remove various forms of surface
contamination and provide a surface profile on a broad spectrum of
steel or foundry parts usually in preparation for a surface coating
to be applied. In peening applications , our shot is used to impart
compressive strength to torque or load bearing metal parts such as
jet engine turbine blades, automotive springs, or heavy equipment
crankshafts. As a cutting medium hard , our shot and grit is used
in gang-saws to process granite and marble blocks.
1. Blast cleaning: Used for blast cleaning of casting, die-casting,
forging; sand removal of casting, steel plate, H type steel, steel
2. Rust removal: Rust removal of casting, forging, steel plate, H
type steel, steel structure.
3. Shot peening: Shot peening of gear, heat treated parts.
4. Shot blasting: Shot blasting of profile steel, ship board, steel
board, steel material,steel structure. 5.Pre-treatment:
Pre-treatment of surface, steel board, profile steel, steel
structure, before painting or coating.
Physical And Chemical Properties
Steel Shot Specification
Tempered Martensite Bainite
|Diameter||0.2 ~ 2.5mm|
|SAE J444||S70, S110, S170, S230, S280, S330, S390, S460, S550, S660, S780|
SAE J444 Standard
1 ) . In 1MT/1.25MT Big Bag
2 ) . 25kg PVC bag+1 MT big bag
3 ) . 25KG PP Big Bag In 1MT Big Bag Or on pallet
According To Customers' Reauirement.
Q : What is your lead time?
A : It usually needs about 7-14 days after receiving the workable
Q : Do you provide free samples?
A : Of course! Customized samples are needed. The mass production
will be started after we get your confirmation on this sample. However, shipping costs are paid
Q : What is your payments term?
A : We can accept 30% deposit, 70% balance to be against the BL
copy or by LC, or other payment terms.