High Speed Automatic Flexo Printing And Die Cutting Machine Corrugated Cardboard Use

High Speed Automatic Corrugated Cardboard Flexo Printing Slotting Die-cutter Machine For Carton box

High Speed Automatic Corrugated Cardboard Flexo Printing Slotting Die-cutter Machine For Carton Box Is Also Called High Speed Automatic Corrugated Paperboard Flexo Printing Slotting Die-cutter Machine For Carton Box

​

1. Designed according to high request and reliable function, humanization operation that can setting, revision, implement, changing and memories in short time, and display data.

2. All of drive rollers are made of high quality steel, hard chrome plated the surface with grinded.

3. Drive gears adopt high quality steel with heat treatment with grinded.

4. The main drive roller adopt keyless connect, decrease the connection gap, ensure printing precision.

5. Engineer oil automatic balance device, keep the oil level equal in each unit.

6. Phase adopts electric digital adjusting with “automatic zero return” and “ memories” function(options: PLC control touch screen)

7. Feeding type use lead edge or kick feeding.

8. Main motor is VFD.

• Adopts lead edge feeding system. Adjust wind volume according on cardboard bending degree to ensure feeding paper smoothly.
• Main motor start protecting device, when the machine units not be clocked, machine can’t run.
• Continuous and skip cardboard feeding options.
• Double feeding rubber roller, the rubber roller has slot for prevent the overlarge pressure.
• Front feeding rubber roller with air cylinder cushioning device, feeding accurately and stable, will not destroy the hardness of the cardboard when the feeding space is small.
• The side baffles adopt electric digital control.( can add automatic or pneumatic aligning device). The back baffle box be adjusted by motorized, the front baffles space adopts manual adjustment.
• With brush dust-remove device with dust-absorption blower. Can adjust the wind volume accord the cardboard size.
• Electric control units separation with warming belt, to ensure worker safe.
• Electric counting device set production quantity, when complete the production automatically warm( if use touch screen control, adjust quantity though touch screen directly)
• The printing roller adopt stemless steel pipe, the surface be grinded, hard chrome plated, balance correction, running smoothly.
• With quickly change printing plate device, when load or unload printing plate, foot switch electric control roller run clockwise or anticlockwise.
• The feeding roller, impression roller, rubber roller and anilox roller space adjusted by self-locking device.
• Printing and phase fixed device, pneumatic brake. When units separating or cleaning, braking mechanism limit gear running, keep original gear’s position.
• The anilox roller adopt automatic pneumatic up-down device( when feeding, anilox roller down automatically according to order, when stop, anilox roller lift according order)
• Adopts pneumatic diaphragm pump inking, automatically recycle, water cleaning.
• With “clean printing plate memory” function, after washing the printing plate, the printing roller will back to the original printing position.
• With pre-creasing wheels, after pre-creasing cardboard not easy destroy.
• Carton box height adjusting adopts PLC and digital control. (or adopt PLC and touch screen adjusting)
• Slotting phase adopt PLC and digital adjustment in 360 degree whatever running and stop(or use PLC and touch screen adjusting)
• Slotting pedestal and creasing wheels horizontal moving adopt electric synchronous adjustment.( PLC with touch screen adjustment as an option, enter the size of the carton, automatically adjust)
• Creasing space and knife roller space adjusting adopts self-locking device.
• The carton height adjustment with anticollision device for the slotting knives, will not destroy the machine.
• Every slotting knife pedetals movement with anticollision device(digital type)
• Slotting knives width is 7mm, be made of good quality with heat treatment, grinding, saw tooth knives. Double type cutting knives, sharp-edged and high precision.
• The hole and handle hold die is option.
• The rubber roller adopts mechanical screw type horizontal movement, the movement distance is 40mm
• The phase of die roller adopt PLC and digital adjustment in 360 degree whatever running and stop( PLC and touch screen adjustment is option)
• Die roller movement adopts PLC and electric digital adjustment in ±10mm(PLC and touch screen is option)
• The space adjustment between rubber roller and die roller adopt self-locking device, and with air cylinder adjust quickly in large range, reduce rubber destroy, prolong rubber use life.
• Feeding roller spaces adjusting adopts self-locking device.
• Speed compensation device can make the rubber roller slipping follow die roller, thereby, the rubber surface speed controlled by knife die. So that the carton shape is same as knife die.
• Equipped with rubber repair device, the rubber can be used after be repaired.

• Board Catching table

• Manual and automatic control option

• The conveyor belt of the board catching arm: its tension can be adjusted independently without any inhibition of belt length. It is easy, flexible and rapid in adjustment.

  Table lift-down

• Used strong chain drive, lift-down move smoothly

• Max stacking height 1300mm

• The lift-down motor is equipped with the braking facility to keep the fix position, don’t slide

  Baffle

• Pneumatic control baffle, used sensor control stacking height

• Back baffle position is adjusted by hand according to board length

• The plain grainy belt has good friction coefficient to avoid the board slide

  Vibrator unit

• One-piece structure, solid and stable, mounted with wheel shaft, can adjust the position of work at any time, design with elastic rod on the axle, and easy defusing with continuous jitter.

• High elastic elasticity rod, long life and no damage to cardboard

• The height of the elasticity rod and defragment can be adjusted arbitrarily.

• It has a waste transfer device.

• The control of speed meter can adjust the waste speed arbitrarily.

• The whole machine is easy to use and easy to operate. It is suitable for the cleaning of rotary and four bar die cutting.

Q:What can you do if the machine broken?

A:Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new

parts replace the broken parts freell,but you need pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

Q:What about the service after sale?

A: One you have bought our machine, you can call us or email us telling us the machine problems and any questions about the machines. We will reply to you with 12hours and help you to slove the problem.

Q: How to visit your company?

a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.

b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.

Q:You are trade company or factory?

A:We are trade company but we also have own factories. Building trade company is just for exporting various types of packing machines.

Q. How long the machine could be made?

A:Normally speaking, machine could be made within 45 working days.

If you need machines in a hurry, we can make it for you less than a months.

About the machine video, pls click:

Video Of Flexo Printing Slotting Die Cutting Machine For Corrugated Cardboard Box

Video Of Automatic Lead Edge Feeding Flexo Printer Slotter Die Cutter Corrugated Boxes​ Usage

Video Of Corrugated Flexo Printing And Die Cutting Machine , 3 Color Flexo Corrugated Machine

Video Of 4 Color Flexo Printer Slotter Die Cutter Machine Auto Lead Edge Feeding Type

Video Of Flexo Printer Slotter Die Cutter , Automatic Lead Edge Feeding Flexo Corrugated Machine

Video Of 4 Color Corrugated Printing Slotting Die Cutting Machine Medium Speed Type

Video Of Automatic Lead Edge Feeding Flexo Corrugated Machine , Flexo Printer Slotter Die Cutter

Video Of High Speed Automatic Flexo Printing And Die Cutting Machine Corrugated Cardboard Use

COMPANY INTRODUCTION：

Hebei Jincheng Information Technology Co.,Ltd is specialized in the production of various kinds of corrugated carton box making equipments of the well-know enterprise.

We are specialized in producing the following corrugated carton making machines:

3 ply, 5 ply, 7 ply corrugated cardboard / paperboard production line

high speed flexo printing slotting die-cutting machine

ordinary printing slotting die-cutting  machine

adsorption single facer

hydraulic shaftless mill roll stand

electrical shaftless mill roll stand

helix cut off unit

right angle sheet feeding machine

DMS Gantry stacker

thin blade slitter scorer

automatic lead edge feeding rotary die cutter machine

chain feeding rotary die-cutting machine

double servo high speed stitching machine

semi automatic folder gluer machine

pasting machine

bunding machine

slitting  creasing machine

semi automatic flute laminator.

With many years experience of international trade and professional manufacture, plus a professional management and sales team,we has been dedicating on the above field enthusiastically to offer our customers with advanced equipments, competitive price, speedy delivery, and fully after service, so as to create value and winning power for our customers.

Businesses have covered CIS, Latin America, Middle East, Europe, North America, Southeast Asia and many other markets.

Keeping pace with time,we would create an innovative, united and upbeat corporate atmosphere, to build us as the No. 1 or No.2 International group in China, and the best cooperative partner for international and domestic customers / end-users as well.

We warmly welcome friends from all over the world coming to our company , or to visit our factories for business negotiation and cooperation.