Insulated Metal Sheet & Eps Sandwich Panel Production Line With
1 Years Warranty
auto insulated metal sheet & eps sandwich wall panel making
machine made in China
Introduction of wall panel machine:
1) Product quality: product quality is priority to the
international standard GB/T9775-1999 (equal to European Standard).
2) The panel which produced by the wall panel machine is
heat-resistant, fire-resistant, insulated, light, nonpoisonous,
little pollution, adjusting the humidity of the room.
3) We can offer a basket of services of design, producing,
installation, commissioning and training, as well as turnkey
project for customers.
Feature of wall panel making machine
1. Anti-earthquake with light weight: In view of its weight per
unit area is only 1/10 of red brick wall, the product has good
anti-earthquake performance. It can be used at low-rise building
and high-rise building, and it is preferred to be used at workshop
with steel frame structure. It can replace the color steel plate
with its better performance.
2. Fast and convenient operation: It can be installed by board or
combination with the dry method, and the product can be nailed,
cut, planed, drilled and stuck.
3. Low comprehensive cost: The product is made of agricultural and
industrial wastes, so the production cost is low. With the low load
of girder and short construction period, it can reduce over 20% of
engineering cost after compared with solid brick and hollow brick.
4. Energy-saving and environmental protection: The production
processing need no high temperature and high pressure. Being a
green environmental-protection energy-saving building materials,
the product has no toxicity, harm, pollution and radioactivity.
5. Increasing the usage area: Under the same condition of
heat-preserving and sound insulation, with the thinner plate, the
product can increase over 10% usage area after compared with the
same building.
6. Having the following features: fireproofing, water-proof,
anti-impact, acid & alkali resistant and anti-aging.
wall panel making machine production line
No. | Name | Function | Size (mm) | Power(KW) | Quantity(set) | 1 | Slurry mixer | Mixing cement mortar of up and own materials | 2300×820×820 | 3 | 2 | 2 | Main mixer | Mixing middle materials | 2800×1500×1300 | 18.5 | 2 | 3 | Crusher | Crush and collection material after cutting | 1960×880×1070 | 11 | 1 | 4 | Duplex units feed in mould board | Automatic feed-in mould board on the main formed units, no need by
manual, can reduce labor, improve work speed. | 4800×3100×2800 | 1.5 | 1 | 5 | Main formed units | It includes all of device of automatic feed-in cement mortar, fiber
cloth, spreading, one-time forming and etc. | 29000×1800×1500 | 11.5 | 1 | 6 | oil brusher | It can adhibit the PVC paper on the mould board by automatic. (Or
brush the oil on the mould board) | 2700×1600×800 | 1.1 | 1 | 7 | Automatic tracking cutting device | It can cut the product on production line when it’s wet, and it
will not hurt the product and mould board, reduce the labor, low
labor intensity . | 4500×2000×1450 | 2.45 | 1 | 8 | Hydraulic lifter of receiving board system | It can load the formed board on the form rack, reduce labor, reduce
hurting the board when by manual, and improve automatic. | 2700×3800×1700 | 9.6 | 1 | 9 | PLC Control system | Control the production line automatic. | 750×500×1800 | | 1 |
|
|