PP Camlock Fitting Type F
1. Handles are made of stainless steel AISI 304 as a standard.
2. Camlocks are capable of transporting liquids,solids and
gases,except liquid gas and steam.
3. Coupling with multi-serrated hose shank & collar are
available on customer's request.
|Standard||Our camlock coupling are made to standard of A-A-59326 (superseding
MIL-C-27487) or DIN 2828|
|Sizes||From 1/2″ to 4″|
|Types||A, B, C, D, DC, DP, E, F|
|Cam levers||We use Stainelss Steel cam levers.|
|Pins, Rings and Safety clips||We use steel plated or stainless steel Pins, Rings and Safety
|Sealings||NBR, EPDM, Viton, PTFE envelop gasket, Other materials are
available on request.|
|Threads||NPT, BSP (We usually make the female thread parallel BSPP, male
thread tapered BSPT)|
Camlocks are often referred to as Cam and Groove Couplings. This is
because they are engineered with grooves that allow the various
styles to fit together creating a tight seal.Their simple structure
and easy operation make them very popular. Camlocks are connected
by simply opening the coupler arms and inserting the adaptor into
the coupler.As the arms are pushed down to the sides, the two
connectors are forced tightly together creating the bonded seal on
an internal gasket.Camlock come in a variety of
1. MIL A-A-59326
Cam & Groove couplings are made in compliance with A-A-59326
(old version called MIL-C-27487) specification.
The European standard EN 14420-7:2004 replaces DIN 2828, which was
applied to cam & groove couplings manufactured to A-A-59326A.A
flat thread seal has been added to the female threaded parts ,and a
smooth hose shank has been added for assembly with DIN 2817 safety
1. Are you a factory or a trading company?
We are a factory with our own foundry, machining, assembly, test
2. How can I know the material is correcct and acceptable?
Material certificate (inspection certificate) is available on
3. What’s the material for your casting of Stainless steel 316
The raw material for the body of camlock coupling is CF8M. The
material certificate is available on request.
What thread you are manufacturing?
BSP and NPT
4. Can I add logo to the products?
Yes, but we usually have quantity requirement if the client want to
add logo to the products. You can contact us for the details.
5. Are you able to design or produce new products for us?
We are always willing to develop new products according to the
clients’ requirements, we are experienced in stainless steel
investment casting and Aluminum gravity casting, so when you have
samples or drawing needing a factory to develop for you, we will
try our best to help you.
6.What’s the pressure ratings for your camlock couplings?
Sizes from 1/2″ to 4″: 150 psi
Size above 4″ 75 psi
Sizes from 1/2″ to 4′: 300 psi
Sizes above 4″ 150 psi
7. I cannot find the products I want on your site. Are you able to
help me to locate it?
We are not able to put every product we can do on this site,
however, we have many years of experience of couplings and related
products and are always pleased to try to help you.
8. May I require a sample before deciding to buy from you?
Yes, we can supply samples free of charge if not too many, but we
usually require the client to pay the freight.
9. Do you have Min. order amount requirement?
We do not have min. order amount requirement, but we hope the order
to be more than US$5000 which the export charge will not occupy a
big proportion.Small order usually increase our cost and will
result in higher prices.
What’s the payment terms you can accept.
We usually require wire transfer (T/T), sometimes we also accept
the payment terms to be irrevocable L/C at sight.
10. What’s the delivery for an order?
General speaking, the production for an normal order is 30 to 45
days. If the order is big, we may need more time.