Steel Plate Automatic Turnover Machine With Four Wheel Mechanism
Automatic Turnover Machine Features:
1. The structure of this turnover machine is made of section steel
and steel plate by fine welding, ensuringits structural strength
2. The hydraulic oil cylinder is of smooth and uniform compaction
and easy to control, and the clamping force is adjustable.
3. The plate blank is fed in by means of rolling bearing,which
causes no damage to the plate blank.
4. The control button and the indicating lamp are all located on
the control panel, easy for operation as well nice and practical.
Automatic Turnover Machine process description:
1 First put the product into the turning machine with the driving
or forklift, start the operation button, the pressing mechanism
automatically presses down (hydraulic) to fix the product, the
turning machine starts to turn over, and the pressing mechanism
automatically resets (hydraulic) loose after the product completes
180° turning. Open the product, drive or forklift to remove the
product; start the reset flip button, flip the machine to reset.
The main material is Q235 high quality carbon steel
Shaft material is made of 45# high quality carbon steel
3 Processing technology
Equipment body frame welding
Automatic Turnover Machine Main features:
- When the raft is up and down, the flip table is stable.
- After the flip is completed, the flip ends to automatically stop.
- Using the emergency stop button makes it possible to quickly stop
the flip in an emergency.
- The unit can be stopped at any position during the flipping
- Products centered into the center of the turning machine working
- The unique flip surface design ensures that the product fits close
to the flipping body, and the turning operation is smooth and safe.
- Use a jacking or lowering mechanism.
- Using synchronous mechanical structure to ensure uniformity and
stability of the whole machine.
- Product nature: Pressure does not damage the product itself.
Automatic Turnover Machine The main parameters:
- Pallet size: 800mm × 700mm × 120mm;
- Steel plate and tray integrated;
- The entire material weight is around 500KG-3000KG.
- Turning machine size: about 2000mm * 900mm * 1650mm.
- Machine weight: about 2.5T.
|Name:||Automatic Turnover Machine||Plate Material:||Stainless Steel SUS201|
|Steel Plate Size:||Length 1250mm, Width 780mm, Height 100-500mm;||Mechanism:||Four Wheel Mechanism|
|Turnover Angle:||180°||Application:||Steel Plate Turning|
Main performance indicators
|Item number||content||Indicator requirements||Definition and condition of performance guarantee value|
|1||Single flip time||90 seconds ± 10%||Single flip 180° time|
|2||Maximum turning capacity||3000kg|
1) Machine: Egg Green GSB05-1426-2001 (instead of GSB G51001-94)
2) The warning part is yellow