Huge Modular Cargo Air Shower Tunnel With 3 Sides Nozzles , Auto PVC Rolling Doors

Huge Modular Cargo Air Shower tunnel With 3 Sides Nozzles With Auto PVC Rolling Doors For Robot

Doors: Soft PVC Fast Speed Scrolled Doors

Door Net Width:W2500mm x H2500MM

Air shower with high speed shutter door.pdf

Description:

Air Shower Tunnels, also known as down flow booths are used to remove particulate contamination from

personnel, their clothing and personal protective equipment. They are typically specified for personnel

entering lunch and break areas, clean rooms and sterile rooms.

Modular construction allows assembling the basic floor plan styles side by side or end to end.

Air Shower Tunnel for clean room is a kind of partial clean equipment with rather strong universality and

is installed at the partition between the clean and non-clean rooms. Its used for the personnel or matters

to shower before entering the clean area. After using it, the dust could effectively be reduced to enter the

clean area and maintain the normal working status.

Capacity - A minimum of 15 seconds retention time is required to clean the dust off personnel clothes.

As retention time increases, the amount of dust removed also increases up to a maximum at about 45

seconds. Additional residence time beyond 45 seconds provides little additional benefit.

Cycle time is adjustable by rotating a simple thumbwheel located in the electrical cabinet.

Retention time

Can be increased to accommodate large volumes of people by increasing the length of the air shower

to form a tunnel.

Air Shower Tunnels are formed by assembling multiple modular sections together.

Features:

1. The control system run automatically by photoelectric sensor, the two door are electric interlocked.

(One door in open state, the other door must in close state. When people enter air shower, the system will

shower automatically by photoelectric sensor)

2. Air shower time from 1 to 99 seconds which can be adjustable

3. Adopt Pre filter and HEPA filter

4. The door, bottom-board, nozzles are used of stainless steel, good appearance.

5. When air shower is used to pass cargo, it is without bottom-board.

Optional accessory:

1. Manual swing door / automatic sliding door/High speed scroll shutter door

2. HEPA filter or ULPA filter

3. Material for cabinet: cold-rolled steel plate with powder coated / SUS#201 / SUS#304

4. Common fluorescent lamp / UV Sterilizer lamp

5. With voice announce

Parameter:

size and specificaton:

Air shower pictures:

Drawing Of Air Shower Tunnel

Testing in factory:

All of equipment will be individually tested for safety and performance in accordance with international Standards before shipment.

Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.

Testing before shipment:

1. Appearance inspection

2. Electrical safety tests

3. Air wind speed testing

4. Function testing

Warranty:

The warranty of our equipment is for 1 year, but excluding consumable parts and accessories.

All equipment is shipped with a comprehensive use’s manual with testing report.

Additional IO/OQ/GMP document is available upon request.

Contact our sales representative for specific warranty details or document request.

Replacement parts:

1. HEPA filter: It should be changed in half or one year once.

2. Pre filter: It should be changed in 3-6 month once.

Why you choose ZHISHENG Company ?

Professional service:

Fast reply in 12 hours if we receive any inquiry or request from customer

Familiar with equipment.

Technician or enginner can go to Southeast Asian countries for guiding insallation of machines. Like Thailand, Vietnam, Philipines, Malaysia and so on.

Delivery time:

• Production period:15-30days

• Shipping notice or insurance for you after the goods is shipped.

After sales service:

• We respect your feed back after receive the goods.

• We provide 1 year warranty after goods arrive.

• We promise all spare parts available in lifetime use.

• We care of your complain within 48hours.

Payment Term:

30% prepayment by T/T at order, the balance of payment before shipment.

Cleanroom equipments,like air shower, FFU. It is one-year warranty.

Dongguan Zhisheng（Lihong） Purification Technology Co., Ltd. is builded in 1997, we are specialized in manufacturing clean room equipments, like air shower, air shower tunnels, Fan Filter unit(FFU), Pass Box,  Clean Bench, Laminar Flow cabinet, clean booth, various sole cleaning machines and boot washer,  various air filters including HEPA filters, fine filters, V type filter, medium filter, pocket filters and Pre-filter and other filters,  and HVAC air diffusers, air grilles and volume control dampers.

We make our products strictly in accordance with state standards. With the top-graded product quality in the industry, our company enjoys great reputation among the customers all over the country. Our products are also exported to Europe, North America, Middle East, Southeast Asia and other countries.

Clean room equipment include air shower, clean bench, FFU,pass box, pass box with air shower, clean booth etc.

Air filters include primary, medium, HEPA filter, Replacement filter for Projector and Air Purifier.

Our HEPA filter has passed the tests of National Center of Quality Supervision and Inspection and Testing for Air Conditioning equipment.

The purifying equipment are in conformity with GB5007-2001 Design Code of Cleaning workshop. Our wide range of air purifying product will surely satisfy different engineering requirements of different purifying grades.

We also supply shoe sole cleaning machines, Hand wash stations, boot washers,wash tanks and  hygiene station machines and stainless steel products for clean room and food factories.

HVAC products include air diffuser, air grille, air louver, air damper, pressure damper, Sound absorber and other accessory parts for air-conditioners. They are widely applied in many large-scale projects and win consistent high praise of our customers because of the superior quality and delicate crafts

We develop new products for pharmacy and hospital, like dispensing room, dynamic pass box, Electric sliding door and swing door for hospital, Laminar flow air supply ceiling,drug cabinet, instruction cabinet ,Wash hand sink, Liquid crystal light and so on.

Adhering to the operation tenet of Honesty Service and Pursue Perfection, our skillful and high quality employees will produce the best and most reliable products with advanced processing equipment and excellent materials. Comprehensive and prefect after-sales services will be available to customers. We are committed to provide the best products and comprehensive services to all customers.

We have Lasing cutting machine, Bending machine, Punching machine, these new machines makes sure the good-looking and superior quality for the machines.

Our workers have been more than 10 year experience in welding , and they have good skills to make sure the quality of machine.

Besides, we have R & D team, we have 5 engineer to design and develop the new product and selove the techncial issues of the machines.

Websites: www.cleanroom-airshower.com

Email: sales@cleanroom-airshower.com; sales-guo@zsfilters.com

Whatsapp(wechat): 86-13712072567