Nema 17 42mm Stepper Motor Driver TB6600 Driver Kit for 3D Printer and CNC Machines

Model: 42mm x 42mm ( Bottom Length x Width) stepper motor
Number of phases: 2 phases
Step angle: 1.8°
Rated voltage: DC 9 Volts - 24 Volts
Rated current: 1.5 Amps
Shaft diameter: 5mm
Phase resistance: 3.6Ω±10
Phase inductance: 3.5mH±20%
Holding torque: 0.1 N.m min
Starting speed: 500RPM
Running speed: 700RPM
Insulation resistance: 100mΩ minute

Size and Weight: The NEMA 17 stepper motor measures 1.7 x 1.7 inches (42x42 millimeters) and is lightweight, making it easy to install and integrate into various devices.
Torque and Speed: It provides high torque output, suitable for applications that require precise control. The step angle is 1.8 degrees, meaning the motor covers an angle of 1.8 degrees per step.
Application Fields: Widely used in automation equipment, robots, CNC machine tools, 3D printers, and other fields that require precise position control.
Drivers and Controllers: Can be used in conjunction with a variety of stepper drivers to achieve efficient and stable motion control.
RH<=90%(40c) Grade 4 anti-lighting protection
1. Motor structure and performance: 42 stepper two-phase miniature motors have a 2-phase structure with a step angle of 1.8°, and smaller step angles can be achieved through subdivision control, which is suitable for high-precision positioning and control needs of the scene.
2. High reliability design: These motors have been optimised by computer, with high operating efficiency and low temperature rise of the electromagnetic system, adopting insulating materials, as well as using low-loss silicon steel sheets and precision one-piece stamping technology, with high precision and low loss.
3. Convenient installation: Equipped with internal thread mounting standard, the thread is not easy to be damaged, and the output shaft bearing embedded design cancels the gearbox cam, which can be directly attached to the mounting surface, simplifying the installation process.
4. Low noise and smooth operation: The motor shows low noise level during operation, suitable for application environments with high requirements for silence, such as 3D printers and engraving machines.
5. Wide range of use: Suitable for 3D printers, automatic screw machines, office copies, medical equipment, robots, CNC machine tools, workshop equipment, etc.
The motor is supplied with a 1 metre long power cable with a 4-pin connector already assemblied, ready to plug and print

Package includes:

Driver TB6600 x 1

Stepper Motor x 1
100cm Cable x 1