High Temperature Glue Einecs For Rubber Tiles , 5000 mpa_s

Section 1 - Chemical Product and Company Identification

Product name : Glue

Chemical name : Glue

Section 2 Composition/Information on Ingredient

Chemical composition

Chemical name CAS No. Formula Composition EINECS

Polyurethane 9009-54-5 / 100. /

Section 3 - Hazards Identification

Potential Health Effects

Eye: May cause eye irritation. May cause redness and pain.

Skin: May cause skin irritation. May be harmful if absorbed through the skin.

Repeated or prolonged exposure may cause drying and cracking of the skin.

Ingestion: May causes gastrointestinal irritation with nausea, vomiting and diarrhea.

May be harmful if swallowed.

Inhalation: Inhalation of vapor may cause respiratory tract irritation. Inhalation of

high concentrations may cause central nervous system effects characterized by nausea,

headache. May be harmful if inhaled.

Section 4-First Aid Measures

Eyes: Immediately flush eyes with copious amounts of water, occasionally lifting the

upper and lower eyelids. Get medical attention if irritation occurs.

Skin: Flush skin with plenty of soap and water. While removing contaminated

clothing and shoes. Get medical aid if irritation develops or persists.

Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious

person. Wash out mouth with water. Get medical aid.

Inhalation: Remove from exposure and move to fresh air immediately. If not

breathing, give artificial respiration. If breathing is difficult, give oxygen.

Seek medical attention if irritation develops or persists.

Section 5 - Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in

pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.

During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.

Extinguishing Media: Use water spray to cool fire-exposed containers.Use water

spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in

Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then

place in suitable container. Remove all sources of ignition.

Ensure adequate ventilation. Do not let this chemical enter the environment and drains.

Section 7 - Handling and Storage

Handling: Use with adequate ventilation. Avoid breathing dust, vapor, mist, or gas.

Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.

Keep away from heat, sparks and flame. Avoid prolonged or repeated exposure.

Storage: Store in a cool, dry, well-ventilated away from incompatible substances.

Store in a tightly closed container. Keep away from sources of ignition.

Section 8 - Exposure Controls, Personal Protection

Engineering Controls: Facilities storing or utilizing this material should be equipped

with an eyewash facility and a safety shower.

Use adequate ventilation to keep airborne concentrations low.

Individual Protection for Industrial Use

Eyes: Wear chemical safety goggles.

Skin: Wear appropriate protective gloves to prevent skin exposure.

Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or

European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved

respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - Physical and Chemical Properties

Section 10 - Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures.

Conditions to Avoid: Incompatible materials. Keep away from flammable sources

and high temperature area.

Incompatibilities with Other Materials: Strong oxidizing agents, strong acids,

strong bases.

Hazardous Decomposition Products: Irritating and toxic fumes and gases.Carbon

monoxide, carbon dioxide.

Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information

RTECS#: CAS# 9009-54-5: TR7875000

LD50/LC50: Not available

Carcinogenicity: Polyurethane - Have not been thoroughly investigated.

Other: To the best of our knowledge, the chemical, physical, and toxicological

properties have not been thoroughly investigated.

Section 12 - Ecological Information

Ecotoxicity: Not available

Other: Do not empty into drains.

Section 13 - Disposal Considerations

Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - Transport Information

Section 15 - Regulatory Information

Regulatory Information: Reference to the local, national and EU / international

regulations.

Hazard Symbols: Not available

Risk Phrases: Not available

Safety Phrases:

S 24/25 Avoid contact with skin and eyes.

S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S 37/39 Wear suitable gloves and eye/face protection.

Section 16 - Additional Information

MSDS Creation Date: Dec 05, 2008

The above information is based on the data of which we are aware and is believed to be

correct as of the data hereof. Since this information may be applied under conditions

beyond our control and with which may be unfamiliar and since data made available

subsequent to the data hereof may suggest modifications of the information, we do not

assume any responsibility for the results of its use. This information is furnished upon

condition that the person receiving it shall make his own determination of the suitability

of the material for his particular purpose.