| Sign In | Join Free | My benadorassociates.com |
|

Unique innovative ideas:
I. High quality 3W LED+700mAcurrent=The top performance
700 mA is the best drive current for 3W LEDs,runing LEDs with
possibly high current can take full advantage of LEDs, making your
initial investment in LED devices to be well worth it.However, LEDs
and LED drivers should be of superior quality as so to undertake
the high electric current, besides the entire equipment should be
good enough in heat dissipating to bear all the heat emitted by 3w
leds.Selects the finest LEDs and drivers to ensure the stable
performance as well as the long life span of the fixtures,our
three-year warranty policy proves our confidence in products.
II. Modularity design
Modularity design, each part interconnect by the male female plug
directly, very easy for repairment and maintenance, only few steps
to assemble up the whole fixture.
Specification
Name: Artemis 2 LED Grow Light Actual power: 60~70W
Model: CDL-G-Artemis 2 LED Qty: 32pcs*3W
Input voltage: AC100~240V LED color: Red(630nm)/Blue(460nm)
Output voltage: DC32~45V Lifespan: 50,000 Hours
Input current: 700mA Brightness value: 0%~100%
Low voltage impulse: 400us PF: 0.9
Control system: RTPM Working frequency: 50~60Hz
Circuits: 2 Working environment: -20~40℃,45%~95%RH
Product size: 290*170*68mm N.W.: 2.3kg
Inner carton size: 380*220*120mm G.W.(Inner carton ): 2.7kg
Outer carton size: 390*450*250mm/4pcs G.W.(Outer carton ): 11kg
Standard configuration: LED Light x1,Remote control x1,Power line
x1,Chaining x2,Remote control operating instruction x1
Remarks: The above parameter is based on Red:Blue=8:1, for
reference only
Illumination and PAR value data sheet
Height(cm): 20 40 60 80 100 150 200
PAR (umol m-2s-l): 930 250 114 67 43 18 10
Illumination(lux): 30000 10000 5000 2800 1900 950 540
Irradiation Area(m^2): 0.28 0.38 0.79 1.13 1.54 2.54 4.52
(Remarks: the irradiation area is base on PAR value>10 )
Characteristics:
1. Use high quality LED lighting source, the lifespan is up to
50000 hours.
2. Replace 3~5 times of the HPSL power, 80% electric energy saving
than the tradition HPSL and MHL.
3. High lighting effect, 90% of the light will be absorbed by the
aquatic plant, but to the traditional HPSL and MHL, the lighting
effect is just 8%~10%.
4. The input voltage is AC100V~240V,suitable for the world
standard. Built-in power supply. No need other equipment, just
access AC100~240V voltage from the plug, the lamp will be working
smoothly, don't need the reflector and ballast either.
5. Revolutionary heat dissipation design, availably alleviate the
internal thermal cycle, 10-15℃ lower than its precursor in
performance.
6. Intelligent monitor system, ensure the whole equipment in a good
working state.
|