1500 Lumens 10 Watt Outdoor LED Flood Lighting Ultra Slim Die Casting Aluminum

1500 Lumens 10 Watt Outdoor LED Flood Light Ultra Slim Die Casting Aluminum

FEATURES :

1. 150 LM/W EPISTAR SMD led chips.

2. Equivalent to 40W CFL Lams OR 80W GLS Lamps
3. Zero light loss reflector
4. High energy efficiency, low power consumption
5. 120°Beaming Angle

Parameters:

Product:
Power:	10W
Input Voltage:	90-240VAC±10﹪ 50-60Hz
Lumens:	1500lm
CCT:	3000K-6500K
Power Factor:	>0.95
RA	>75
Working environment:	outdoor, -20℃~ +45℃
Beam angle:	120°
Size:	12*4.7*15.5CM
Packing:	50 pcs / 63*25.5*33cm / 15 kgs / ctn

ATTENTIONS:

1. The light’s waterproof grade is IP65, able to withstand rains, but it can’t work under water.
2. The light’s operating at working temperature between -20℃ and 45℃.

3. Make sure the products are out of reach from children,
4. Please don’t install in flammable ,explosive or corrosive circumstances,
5. Cut off power supply before and in installation process. If the product is damaged due to mal-operation, it will invalid the warranty.

Light Distribution Curve:

Applications:

1. Can be mounted vertically or horizontally, adjustable stand lets you point the light at different angles.
2. Perfect for outdoor project lighting of Building exterior wall, parking lot, stadium, bridge, gardens, square and many other fields.

LUXTRONIC LIGHTING LTD established in 2010 (Named Grandol Industry Ltd before). We experienced from small trading firm to now medium size industrial complex. With ISO9001:2008 approval & other certificates, we specialize in: Industrial LED High Bay & Outdoor LED Flood Light.

Service:

1) Design & Prototype:

Qualified engineers provide full solutions & supports according to customers' design demands, including the Appearance Design, Function Improvement, Prototype Preparation.

2) Production:

Skillful workers & modern lines promise Stable Quality & Scheduled Delivery.

Quality Control:

1) Quality Control Process:

The production process to implement the " three inspection" , self-inspection, mutual inspection, special inspection. The manufactured products require the "three pass" : Raw material into the plant pass, Semi-finished product pass, finished off the factory pass.

2) Quality Management System Certification:

Based on the concept of "Product quality is enterprise's life", GRANDOL actively adopt the quality management system certification ISO 9001:2008/CE/ROHS/TUV/IEC.

Equipment

IES Test

The Illuminating Engineering Society of North America(IIES) is the recognized technical authority on illumination, founded in 1906, it is a world famous lighting test institute IES LM-79-08 is the testing standard for Electrical and Photometric Measurements of Solid-State Lighting Products which was released in 2008.

Integrating Sphere

Integrating Sphere llight source light emitted by the fiber, is gathered in the monochromator entrance slit, the monochromator after by monochromatic light from the monochromator exit slit injection