Ship To Quay Yokohama Pneumatic Rubber Boat Dock Fender With Aircraft Tyre

Introduction of floating pneumatic fender

Floating pneumatic fenders have been used for around 50 years.It is the leading anti-collision device for ship use in the world. The compressed air filled rubber fender is used as a protective medium for ship-to-ship, ship to quay and ship-to -berthing operation.

Floating pneumatic fenders can be delivered in different sizes. It has chain and tyre net(CTN) type which is usually recommend to protect the fender body, but sling type or body only is also available.

Structure of floating pneumatic fender

Floating pneumatic fender consists of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized together firmly.

1. The outer rubbers are used to protect the cord layers and inner rubber from abrasion

2. The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure.

3. The inner rubber layer seals air inside the fender.

4. Fenders diameter larger than 2500mm will be equipped with safety valve.

Specification of floating pneumatic fender

Production process of floating pneumatic fender

Floating pneumatic fender use matters needing attention

1 Pneumatic pressure control in±5% of the rated pressure

2 Test pressure normally, add pressure in a timely manner

3 Avoid contact with sharp objects

4 When Long time not need, should wash to dry, filled with right amount of compressed air, placed in a cool dry ventilated place.

5 Storage place away from heat, acid and alkali, oil and grease

6 When store, shall not be folded and piled up

Application of floating pneumatic fender

Ship to ship transfers at seas.

Berthing operation that vessels to berth at dock/jetty.

Oil & gas tankers

Fast ferries & aluminum vessels

Temporary and permanent installations

Rapid response and emergencies

Liquid cargo and naval defense vessels

The storage of floating pneumatic fender

1.Wash the surface of the fender,dry up and fill in sufficient right amount of compressed air to lay them in a cool.dry and well-ventilated place.

2.The storage place should be away from heat.

3.Keep fender away from acid,alkali,grease and organic solvents

4.Fenders can't be piled up and heavy items when fenders are not used.

Factory established in 1992, Qingdao Florescence Marine Supply Co., Ltd (Subsidiary of Qingdao Florescence Co., Ltd) specializes in manufacturing pneumatic rubber fenders, foam fenders, various ship dock rubber fenders, and ship launching & salvage rubber airbags.

FLORESCENCE products are designed, manufactured, and tested by per ISO 9001:2015 requirements. And every unit is robustly built to the stringent requirements of ship surveyors such as CCS, BV, RS, ABS, LR, etc.

We are the supplier of many navy, such as Bangladesh Navy, France Navy, Greece Navy, Thailand Navy, Italy Navy, Philippines Navy, etc.

FLORESCENCE considers our clients as a part of the team, treating them as partners. We are always together with them on each step of the way, from finding the solutions of fender using and ship launching to the manufacturing and installation operations on site. Our rich experience has earned us a reputation as a dependable partner in many ports and shipyards around the world.