Load Cell TC013 C3 round disk Alloy steel Mini weighing force Sensor replace HBM for silo scale 2mv/v

TC013 0.5t to 100t Tension and compression silo load cell for silo scale

High Motion Action Silo Load Cells 120*25.5*45 Strong Resistance To Partial Loading for silo scale

Good quality and long life

Specifications:

• Rated output(mv/v): 2.00±0.005 4.00±0.005
• Safe Overload: 120% FS
• Excitation Voltage: 10V(DC/AC)
• Input resistance(Ω): 385±15765±15
• Output resistance(Ω):350±3 700±5
• Zero Balance: ±1.00% FS
• Nonlinearity: ±0.03% FS.
• Hysteresis: ±0.03%FS
• Repeatablity: ±0.02% FS.
• Creep(30minutes): ±0.02% FS.
• Compensated temperature range: -10℃——+50℃
• Operating Temperature Range:-20℃——+60℃
• Temperature effect on zero: ±0.02%FS/10℃
• Temperature effect on output:±0.02%FS/10℃
• Insulation Resistance:≥5000MΩ
• Cable Color code:+Exc-Red, +Sig -Grn, -Exc-Blk, -Sig- Wht
• Cable:Φ6×9m

material:

• Alloy steel load cell

capacity:

• 0.5t to 100t load cell

• For more details, pls. contact via sales@innovation-electronic.com

INNOVATION ELECTRONIC CO..,LTD Focus on Weighing and Static solution in Packing industry!

In the past tens of years, we established very good relationship with wide range of suppliers and customers in weighing and static products especially in packing industry and also investigated in our own factories of weighing and static, step by step, we get our own special advantages in this market: more accuracy and more economic weighing and static solution for you!

Our weighing solution mainly include:

1. all kinds of load cells( tension and compression load cell, s type load cell, single point load cell, shear beam load cell, those load cells are widely used in kinds of packing industry like food weighing and packing, cement weighing and packing, chemical dosing and packing, pharmaceutical dosing and packing, electronic balance, silo scale, truck scale, etc. )

2. High accuracy bench scale, floor scale, table scale, counting scale. They are widely used in kinds of places that need high accuracy weighing, like small bolts counting and packing, expensive powder and particles weighing and packing, sub-package system,etc.

3. Weighing equipment like dosing machine, checkweigher, roller conveyor scale, etc. This equipment are widely used in weighing and packing production line. The main use is to feed material of set quantity, and double check whether the weight is in the allowed range or not and eliminate the packages that not in allowed range.

The Static solution mainly include:

1. Static charging machine of 20KV, 30KV, 60KV, 100KV. They are wide used in packing material production line, like plastic film machine, bag making machine, IML labeling machine,side weld bag handles, shrink wrapping, electrostatic bonding, etc.

2. Static eliminators of 7.5KV, 6kv, AND anti-static bar,Ionizing air gun, Ionizing Air nozzle, Static foam, etc. These eliminators are widely used in static elimination before packing of finished products. It is to make the packing better, or to remove the dust on the surface of products.

If you have any weighing or static problem especially in packing industry, contact us, we are confident to provide you a suitable and economic Solution!