Product Details
Company Profile

Circuit Breaker Analyzer Precise Electrical Testing Tools

Electrical Test Set Circuit Breaker Analyzer Mechanical Characteristics Tester

I.Introduction

Circuit Breaker Analyzer is used for testing, analyzing and assessing power system circuit breakers, mechanical characteristics of load switches and isolated switches and other AC high voltage switches, contact resistance, Arcing contacts and vibration characteristics etc. The functions of Circuit Breaker Analyzer cover all testing items of high voltage circuit breaks.

Comparing with the traditional circuit breaker tester, this Circuit Breaker Analyzer has the following unique advantages:

1) The integrated vibration test function of Circuit Breaker test set provides a new means of detection circuit breaker mechanical characteristics for users, compared to traditional time measurement and speed measurement, the vibration fingerprint detection is easier and more efficient.

2) The vibration fingerprint test results contain richer information of circuit breaker operation, for potential risk of failure or faulty breakers, it can locate the fault position quickly.

3) The vibration tests do not need to change the original line connection, so the users can complete the charged detection of mechanical characteristics of circuit breaker.

4) Arcing contact analysis module allows users to automatically assess the degree of loss of inside Arc suppression contact of circuit breaker without disassembly.

5) Users can use Circuit Breaker Analyzer to complete the contact resistance tests, do not need to buy contact resistance tester separately.

II.Features

1) Measurement of closing time, opening time, time spread between poles, time spread between units of one pole, bounces etc.
2) Measurement of closing speed, opening speed and average speed.

3) Measurement of clearance between open contacts, over travel, overshoot travel and total travel.

4) Measurement of closing coil current time curve, opening coil current time curve and the maximum coil current

5) Test travel time curve, speed time curve and acceleration time curve

6) Measurement of pre-insertion resistance value and pre-insertion ion time.

7) Test contact resistance

8) Measurement of dynamic resistance time curve and length for arcing contacts

9) Vibration test, including vibration fingerprint curve acquisition, management, and vibration fingerprint curve automatic matching.

10) CO-t1-CO,O-t-CO-t1-CO,CO rated operating sequence verification test.

11) Drawing Envelopes for reference travel curve and compare travel curve with envelopes

12) Mechanical travel curve automatic compare with saved travel curve

13) Measurement of CO time (close-open time) and OC time (Opening-Closing time)

14) Graphite contact closing time, opening time, dynamic resistance curve measurement

15) Zoom, editors, statistics and analysis for measurement curves.

16)12.1-inch touch screen for control and data input

17) Built-in micro printer for test result printout.

18) Generate WORD format test report automatically (all reports and data can be exported through Flash disk).

III.Technical specifications

12 channels for time measurement	3-channel supports both the time contact and resistance contact time
12 channels for time measurement	6-channel isolated contacts for cascaded unit measurement of pole
Time measurement	Range: 4000ms
	Error :< 0.1ms
	Resolution: 0.01ms
Travel measurement according to sensor	Linear resistance sensor: Measurement range: 0~250mm; resolution: 0.01mm; error:<0.5mm Measurement range: 0~25mm; resolution: 0.01mm; error:<0.05mm
Travel measurement according to sensor	Angle resistance sensor: Measurement range: 0~360°; resolution: 0.01°; error:<0.5°
Pre-insertion Resistance Measurement	Range: 50~5000ohm; error :<1%RDG+2D
Dynamic resistance measurement	Test current: 25~100A
Dynamic resistance measurement	Measurement error :< 1%RDG+2D
Contact resistance measurement	Range:0--10mohm ; Error<0.5%RDG+0.05%FS
Contact resistance measurement	Range: 0-2mohm; Error:<0.5%RDG+2D
Speed measurement	250mm linear resistance scale: 0~20m/s; error:<0.5%RDG+2D
	25mm linear resistance scale: 0~20m/s; error:<0.5%RDG+2D
	Angle sensor: 0~20m/s; error:<0.5%RDG+2D
	Acceleration sensor: 0~20m/s; error:<5%RDG+2D
Coil current measurement	Range: 0~20A; resolution: 0.001A; error:<0.01A
Vibration measurement	Range: 0~5000G; error:<3%
Internal DC power source	Voltage: 12~265V; current:0~20A
Data Save	Built-in 8G storage memory and 2 USB interface for data export and external keyboard or mouse connection
Power supply	AC220V±10%; 50Hz±10%
Working environment	Temperature: -10~50°C; Humidity:<80%

Product Tags:


*From:	Your email address is incorrect!
*To:	DONGGUAN YUYANG INSTRUMENT CO., LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Electrical Test Set
Brand Name:	YUYANG
Model Number:	CBA-I
Certification:	ISO
Place of Origin:	China
MOQ:	1 Set
Price:	USD10000
Supply Ability:	100 sets per month
Delivery Time:	15 days
Packaging Details:	Plywood case
Keyword:	Circuit breaker analyzer
Power supply:	AC220V±10%; 50Hz±10%
Display:	LCD
Test object:	Circuit breaker
Warranty:	1 Year
Condition:	New