Screwless Terminal LED Driver Controller , DC12V - 48V Input LED Driver DALI

Single Channel DC12-48V Customized Constant Current DALI Dimmer Driver DL8009

Summerize:

DL8009 is one product of the DC input DALI dimmer driver series.It has black and aluminium alloy shell. It has only a single channel constant current output. Its standard output current is 350mA / 700mA / 1200mA which can be customized as you need.

With the help of DALI dimmer driver, you can realize a smart control of DALI lighting controlling system. You can also use a simple DALI touch dimmer to dim your LED lights in small projects.

1. PWM output 350mA / 700mA / 1200mA constant current and 1 channel output.

2. DALI digital control input, dimming control LED module.

3. Addressing output channel.

4. Dimming range is from 0-100% range, (LED brightness start in 1%).

5. Used for DC power supply . over-temperature protection, security level is 2.

6. Support TOUCH DIM function and can be dimmed manually.(220VAC dimming way)

7. Single channel DC12-48V constant current output.

8. Custom-made is available and 3 years warranty time.

Tech-parameter:

Specifications of DALI Dimming Driver Series:

Touch Dim Function Description:

1). Short press the Touch DIM switch (<0.5s) to control the lamp on or off.

2). Long press the Touch DIM switch (>0.5s) to dim the brightness of light;The dimming direction will change every time after pressing switch.

3). When the light being turned off,long press the Touch DIM switch can turn on the light and adjust the brightness according to the dimming direction.

4). The brightness adjustment range is 1%-100%, and the light can be turned off through short pressing when do the adjustment with long pressing Touch DIM switch.

5). Power off memory function,the state before turn down will be maintained when power on again.

Product Online:

Product Installation Notes:

1, Please read the connecting instruction picture before installation.

2, Please use the complete set of product according to the provided specification.

3, Please firstly pressure the cap end down in wire connecting process,then insert the thread of wire,and lastly check the wire is or not insert firmly.

4, In order to avoid the damage of the equipment,please check the connecting method is correct or not before connecting the power.

5, Please ensure that the grounding end "" well reliable grounding.

6, The DALI bus is using BV 2 x1. 5 mm wire, the longest distance is 300 meters.

Remark: DALI and Touch DIM Functions can’t be used simultaneously,which can be controlled respectively by using DALI controllers or equipments with Touch DIM Function.

DALI Dimming System Wiring Diagram: