Stainless Steel SS304 Sludge Dewatering Machine , Sludge Dehydrator Coal Dewatering

Working Principle

Thickening: When the shaft is driven by the screw, moving rings around the shaft move up

and down relatively. Most water is pressed out from the thickening zone and fall down to the

filtrate tank for gravity.

Dewatering: The thickened sludge moves forward continuously from the thickening zone

towards the dewatering zone. With the pitch of the screw shaft thread getting narrower and

narrower, the pressure in the filter chamber increases higher and higher. In addition to the

pressure generated by the back-pressure plate, the sludge is greatly pressed and dryer

sludge cakes produce.

Self-cleaning: The moving rings rotates continuously up and down under the pushing of the

running screw shaft while the gaps between the fixed rings and moving rings are cleaned to

prevent from clogging that happens frequently for traditional dewatering equipment.

Technical parameters

Characteristic

♦It is not easy to be blocked

With self-cleaning function. There is no need to prevent the filter clogging and cleaning,

reduce the amount of water rinse, and reduce the burden of internal circulation.

♦Low speed operation

1. Rotary shaft speed about 2 to 3 r / min, low power consumption.

2. Less failure, small noise, and safe operation.

♦ Simple operation

1. Through the cabinet interlocked with the feeding pump, dosing pump, to achieve 24 hours

of continuous unmanned operation.

2. Routine maintenance time is short, maintenance is simple.

♦ Long service life

1. The body is almost all stainless steel, to maximize the service life.

2. Replacement parts only screw shaft and swimming ring, the use of long cycle.