Light Weight Induction Melting Furnace For Brass Platinum / Palladium / Rhodium

LSZ-90 90kw electric Induction Melting Furnace for Brass Platinum / Palladium / Rhodium

1. Basic Principles of Induction Melting Furnaces:
The metal smelting process is completed in the induction melting furnace using the induction electrocaloric effect. The power supply is generally divided into three types: high frequency (above 10 kHz), intermediate frequency (50 kHz to 10 kHz) and power frequency (50 or 60 kHz). According to the size and capacity of the charge and the frequency of the power supply, induction melting furnaces are divided into two categories: core (mainly closed tank type) and coreless (crucible type). The circuit of an induction melting furnace is very similar to that of a transformer. The primary coil is an induction coil, and the coil of a cored induction furnace has an iron core to reduce magnetic flux leakage and improve power factor. The alternating magnetic field generated by the coil induces an electromotive force in the charge and generates Joule heat.

During smelting, the metal is heated by induction and then conducted to the slag, so the temperature of the slag is low, and the structure of the furnace determines that the interface between the steel and the slag is small, which is not conducive to the physical and chemical reaction between the molten pool and the slag, so special steel or When nickel-based alloys are used, better raw materials should be used, ingredients should be prepared according to the burning loss of each element, and they should be rapidly heated and melted. When a large amount of charge has been melted, slag should be added to reduce oxidation. The slag should be compatible with the furnace lining. After full melting, add deoxidizers (ferrosilicon powder, silicon calcium powder, aluminum powder, etc.) in batches according to the composition of the finished product. If necessary, take samples for analysis and adjust the composition. When the composition is qualified and the deoxidation is good, the steel can be tapped. Cast iron is not seriously oxidized during melting and heat preservation, and the metallurgical quality requirements are also low, which can give full play to the advantages of induction heating for convenient operation.

2. Induction Melting Furnace Feature:
a. Light weight, small size and modular design
d. IGBT inversion technology, high-efficient conversion,LC series resonance
c. Environmental protection,easy operation, low labor intensity
d. Low energy comsumption, energy saving 15%-30% compared to SCR technology
e. Melting rapidly, heating evenly, no oxide layer, and using timer to make sure
producing high quality product with high and good consistency
f. Perfect protecting function of over temperature, over current, over/low voltage temperature,
water shortage,phase failure etc. safety and reliability
g. 100 percent success rate of start-up, power factor always over 95%
h. equipped with infrared temperature detecting system(optional)
i. equipped with water cooling system(optional)
j. equipped with CNC or PLC controlling equipment(optional)

3. Brief Introduction of Electric Induction Melting Furnace:

Medium frequency induction melting furnace is an induction heating machine. Alternating current in the coils melts the metals in the crucible and then heats the hot metal to the temperature needed. It is the heat treatment prior to forging, sintering and hot rolling in casting and melting industries.

4. Melting Capacity of Induction Melting Furnace:

5. Induction Melting Furnace Application:

Zhengzhou Lanshuo Electronics Co., Ltd is located in Zhengzhou National High& New Technology and Industrial Development Zone. Our mission is to provide customers the highest quality products to gain the reputation by focusing on customer satisfaction.

15-year experience in the R&D, design, production of high frequency and medium frequency induction heating machines. Products have won great reputation among clients.

Our main products are High Frequency IGBT Induction Heating Machine and Super Audio Induction Heating Machine, CNC Quenching Machine Tool, Medium Frequency Induction Melting Furnace, KGPS Medium Frequency Induction Melting Furnace, Open type Cooling Tower, Closed Type Cooling Tower, Water Cooling Chiller, etc.

Our roducts' quality are reliable, the performance are excellence. Our equipments are widely used in the industry of melting, casting, forging, heating, heat preservation,hot rolling, brazing, annealing, quenching, hot fitting, bending before heat treatment etc.

We have exported to Pakistan, Egypt, India, Vietnam, Mexico, Uganda, Ukraine, Serbia, Russia, Germany, Turkey, South Korea, Malaysia, Philippines and other countries.

Welcome friends from all over the world to visit our factory and give valuable advice.