35 Kw Electric Metal Melting Furnace Aluminum Melting Furnace Machine Simple Installation

35 Kw Electric Metal Melting Furnace Aluminum Melting Furnace Machine Simple Installation

The alternating current flows to a conductor (usually a copper tube) that is curled into a ring, which generates a magnetic beam. When the metal is placed in it, the magnetic beam runs through the metal body and generates a pit current (rotating current) in the direction of the Self-turning of the magnetic beam... At this time of induction, the resistance in the metal produces Joule heat (1 square R), which makes the temperature rise. This is induction heating. Thus, the heated objects such as metals can be heated in a non-contact state. (Fever is caused by Joule heat and hysteresis loss, but mainly by Joule heat). TMS-35kw medium frequency power supply; the smelting capacity of pure gold water is 5-30kg for each furnace, and the smelting capacity of hot furnace is 30 minutes for one furnace.

Features of electric melting furnace

1. Using IGBT power devices and our company's unique converter control technology, the equipment has higher reliability and lower maintenance cost.

2. 100% load sustainability, 24 hours operation at maximum power;

3. It has constant voltage/constant power control function and higher heating efficiency.

4. Full display of output power, frequency and current;

5. Installation is simple. It can be used only by connecting electricity and water, and no special person is required to install it.

6. Miniaturization is only 20-130KG.

Technical parameters of electric melting furnace

Equipment peripheral configuration and power supply requirements

1. Required input voltage: three-phase 380V 50-60Hz (input range: 320v-420v)

2. Air switch is 3 × 80A; cable is required to be 12mm2 national standard soft copper wire

3. Closed circulating water tank or professional industrial chiller is recommended for cooling water to provide more stable cooling work for equipment. With professional chiller, keep the water temperature at about 22 ℃, which has the best cooling effect on the equipment, so it should be the first choice. The use of chiller can greatly reduce the failure rate of the equipment. The selection of chiller model depends on the power of the equipment. When using the chiller, the water temperature cannot be adjusted too low. Generally, it is controlled at about 25 ℃. If it is too low, it will condense in the equipment after it is lower than the dew point of the water, which will cause the insulation to drop and sparking and other faults.

The parameters of circulating cooling system or chiller cooling system recommended by our company are as follows:

Henan TMS Machinery Co, Ltd is located in Zhengzhou city, Henan province, China. We are specialized in manufacturing the scrap metal recycling equipment, such as copper wire granulator, copper wire stripping machine, scrap metal baler, radiator recycling machine, motor stator recycling machine, metal shearing machine, dual shaft shredder, blade sharpener machine etc.

Our company process professional sales group, technical engineer and perfect after-sales team. We firmly believe that quality is the only standard for enterprises to survive. The quality of products we manufactured is superior. And our engineer will provide professional technical analysis and recommend suitable equipment to customers. At that time, to make client use our machine without any worries, best after-sales service is also supplied to everyone. Our after-sales person will follow your order in 24 hours.

By now, our machines are sold to all over the world. Just like Europe (France, US, Poland, Norway, Spain, Malta, Czech Republic, Italy etc), Americas(USA, Canada, Mexico, Brazil, Colombia etc), Australia(Australia, New Zealand), Asia(Thailand, Korea, India, Pakistan, Singapore, Malaysia, Sri Lanka, Saudi Arabia, Indonesia, Qatar, Dubai), Africa(Morocco, Ghana, Tanzania). In our factory, there are many advanced manufacturing facilities and almost 50 experienced workers, we have ability to produce 100-200 sets machine and 50 sets large production line per month. We can meet customers’ demand for kinds of recycling equipment.

Our company business aim is that Credit first, customer first, quality satisfaction, delivery on time, and willing to cooperate with you sincerely, development hand in hand. In the future, we will adhere to the company's philosophy and continue to provide customers with better products and quality services. With Joint efforts of our team, we can make our company bigger and stronger.