LSA PROFIL Series 2 Disconnection Module 10 Pair / Lsa Disconnection Module Nicle Base

10 Pairs LSA PROFIL Series 2 disconnection module​

Material

Features :

Based on genuine LSA-PLUS Connection technology.
Avaiable in 10 pair configuration with parallel test access or overvoltage protection contact.
LSA-PLUS module mount on back mount frame.
LSA-PROFIL modules mount on profile rods (8-pair modules: 75mm spacing between rods; 10-pair modules:95mm spacing between rods) or back mount frame.
Suitable for use in all xDSL and ADSL2+ circuits.
Robust long-term environment stability allows both indoor and outdoor installation.

Supports all LSA-PLUS Series 2 accessories :

Overvoltage protection magazine.
Labels & Test and connection cords.

Specification :

Transient voltage : 2.5 kV.
Operation voltage for basic insulation : 210 VDC TNV.
Pollution severity : II.
Current - carrying capacity : 2 A.
Impulse current : 5 kA ( 8 / 2µs ).
Single solid wire per contact : 0.35 mm / 0.68 mm to 0.9 mm / 1.5 mm.
Stranded wires : 0.12mm to 0.32 mm / up to 2.1 mm AWG 28 to AWG 20.
Overall diameter of connectable wire : 0.68 mm to 1.6 mm (solid insulation ).
Storage Temperature: - 40 °C to + 90 °C.
Transport Temperature : - 40 °C to + 90 °C.
Operation Temperature : - 5 °C to + 60 °C.
Relative humidity : < 95% ; no water condensation, no ice.
Atmosphere pressure: 70-106Kpa.

Over 30 Years of Experience
Cixi Anshi Communication Equipment has been specializing in jacks and connectors since 1986. We offer you more than 200 specifications in 10 categories, including fiber-optic distribution trays and splice closures, drop wire connectors, Cat5E and Cat6E patch cables, internet connectors, and distribution boxes. About 60% of our products are exported to Southeast Asia, Europe, the Middle East, Africa and the US.

One New Product Every Month
Our six R&D staff members use advanced testing equipment from the US. They use computer software such as AutoCAD, Pro/E, 3D MAX and Photoshop. They also develop one new product every month to meet your requirements.

OEM/ODM Orders Accepted
Now, we have more than 100 staff members and 20 of them are technicians at our 4,800 sqm factory. We have two production lines dedicated to processing your OEM/ODM orders, thus, we produce $200,000 worth of components every month.

Three Sections to Control Quality
Following ISO 9001:2000 guidelines, our quality control department includes QC, QE and QA sections. QA staff members check the quality of all raw and processed materials, while QE personnel are responsible for the related documents. QC staff members handle your requests and quality statistics, and make the corresponding improvements. We use materials from South Korea, the US and Taiwan to ensure quality. You can have confidence in ordering our CE-approved products.

Contact Us Today
Call us today for more information.