| Sign In | Join Free | My benadorassociates.com |
|
| Sign In | Join Free | My benadorassociates.com |
|
| Categories | Hollow Shaft Incremental Encoders |
|---|---|
| Brand Name: | HENGXIANG |
| Model Number: | KN40 hole encoder |
| Certification: | CE,ISO9001 |
| Place of Origin: | Shanghai,China |
| MOQ: | 1pcs encoder to start order |
| Price: | negotiable |
| Payment Terms: | D/A, D/P, T/T, Western Union, Credit Card, Master Card,Paypal, etc |
| Supply Ability: | 100K pieces per year |
| Delivery Time: | 3-5 working days for sample order, 7-15 working days for mass order |
| Packaging Details: | each 1 piece was packed into single carton box |
| Product name: | Icremental type encoder |
| Shaft diameter: | 6mm/8mm/9mm/9.52mm/10mm |
| Output phase: | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
| Resolution: | 1024ppr(Min) to 20000ppr(Max) |
| Optional supply voltage: | DC5V & DC8-30V |
| Output mode: | Open Collector, Voltage output, Push-pull, TTL,HTL |
| Wire length: | 500mm (it can be added as requirement) |
| Weight: | about 90g (with package) |
External diameter 40mm thickness 20mm through hole 6mm 1024ppr KN40 hollow encoder
Production Video
There are plenty of encoder video if you still have any doubts on encoder, please email us directly or contact online service right now.
At the same time, you could also visit our YOUTUBY page easily.
Most of the encoder series have videos for reference.
Product introduction for KN40 hollow shaft encoder
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| External diameter | 40mm |
| Thickness | 20mm |
| Installation dimension | R17mm, R20mm;R23mm |
| Hollow shaft type | blind hole; through hole, taper hole,solid taper shaft |
| Solid shaft diameter | 10mm (taper shape) |
| Hollow shaft diameter | 6mm;8mm;9mm;9.52mm;10mm |
| Resolution | 1024;2048;2500;3600;5000;7200;10000;14400 |
| 1000/4;1000/6;1000/8;1024/4;1024/6；1024/8；2000/4；2000/6；2000/8；2048/4；2048/6;2048/8；2500/4；2500/6；2500/8;4096/4;4096/6;4096/8;5000/4;5000/6;5000/8 | |
| Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
| Supply voltage | DC5V ; DC8--30V |
| Outlet type | Cable out from side |
| Output mode | NPN/PNP(Open Collector Output) |
| Voltage output | |
| Push-pull output | |
| line drive (26LS31) TTL | |
| line drive(DC8-30V) HTL | |
| TTL(DC5V) phase ABZ are back of phase UVW | |
| Protection grade | IP40 |
| Shell Material | die cast aluminum |
| Certification | CE |
| package | Carton box |
| Net weight | About 90g (with package) |
Principle of encoder
Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a signal level which corresponds to the applied supply voltage. The supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to replace true open collector circuits by using an external diode connected in a way to limit the direction of the current for RS422 (TTL) circuits provide a constant 5 V signal level that is not dependent on the supply voltage. Two supply voltage ranges can be selected: From 4.75 to 5.5 VDC (can be used to replace open collector output drivers) or from 8 to 30 VDC. Using differential signals the output fully complies to the RS422 standard.
The differential outputs have the highest frequency response capability and the best noise immunity. To ensure this the receiver should also be a differential.
Replacement of Older Output Drivers
Applications
Factory Encoder Production Capability
5000 pieces per month
-------- Production Line Capacity
50000 pieces per year
--------Actual Units Produced (Previous Year)
About Encoder Vibration
Vibration acting on an encoder always cause wrong pulse easily.
So we have to pay more attention to encoder working place.
The more pulse per round, the narrower groovy spacing of grating, ore effect to encoder by vibration, when motor speed is low or even stopped, vibration acting on encoder shaft or encoder shell would cause grating vibration, in this way, encoder might show wrong pulse signal.
|
Blind Hole K35 High Speed Rotary Encoder 1000 Ppr External Diameter 35mm
8192ppr 8 Poles Incremental Position Encoder K52 Hollow Shaft UVW Signal Line Driver Output
K76 Quadrature Rotary Encoder , 3000 Resolution Hollow Shaft Encoder For Motor
K50 Series Rotary Incremental Encoder 2500 Ppr ABZA - B - Z - Phase For Industry
Small Incremental Shaft Encoder , K50 Precision Rotary Encoder 3000 Lines Line Driver 7272 Output
IP65 Hollow Shaft Incremental Encoders K38 Diameter 38mm Totem Pole Output Cable Length 1000mm
OC Output Hollow Shaft Incremental Encoders , Mini Rotary Encoder External Diameter 18mm
K18 Hollow Shaft Electric Motor Encoder , A Phase Small Rotary Encoder
Small Instrument Incremental Type Encoder , Hollow Shaft Rotary Encoder K22 Blind Hole 4mm
18mm Thickness Hollow Shaft Incremental Encoders , K22 Miniature Optical Encoder
