ABB Module IMMPI01 ABB IMMPI-01 ABB IMMPI 01 INTERFACE MODULE superior quality product

ABB Module IMMPI01 ABB IMMPI-01 ABB IMMPI 01 INTERFACE MODULE superior quality product

Product Description:

Temporary interruption of the passive mode While a communication between the DRUCK or EMAS
blocks and a device connected to COM1 is being executed, it may be come necessary to modify the program, for example. For this purpose, you must switch over COM1 from the passive mode into the active mode.Switch-over: Passive mode Active mode There are three possibilities for switching over:
Set the RUN/STOP switch to the "STOP" positionDuring the execution of the PLC program, the system
constant KW 00,06 must not be sent to the PLC because this would cause the system to be switched back to the passive mode. The special command assigns the value of "1" to the image
of the system constant KW 00,06 located in the operand memory. The PLC evaluates the value of this image and sets the application mode of COM1 correspondingly.

Related Product Recommendation:

Product's Character:

For the passive mode of COM1, the interface parameters can be changed using the SINIT function block. If the changed values are not plausible, the COM1 interface uses the default values.The interface is newly initialized each time the operating mode is switched over. The active mode parameters are set in the active mode, whereas in the passive mode the parameters established by the SINIT block or the default values are set. Serial interface COM2 Interface standard: EIA RS-232 Assignment of the serial interface COM2 The serial interface COM2 has the following pin assignment The serial interface COM2 is only suitable for the passive mode. In addition, it can be operated as a MODBUS interface.The passive mode is used to perform a communication configured with the DRUCK and EMAS blocks between the user program and a device connected to the serial interface.

LOT 3 NEW GATES 330H100 POWERGRIP TIMING BELT 33X1IN D220371

LOT 4 NEW GATES ASSORTED A47 210L100 190XL025 190XL BELT D354591

LOT 2 REXNORD 814412 DBZ 62 SB 0.625 HUB 5/8IN COUPLING D230119

LOT 2 NEW TB WOODS SDS SURE-GRIP STEEL QD BUSHING 1-11/16IN BORE D301617

LOT 2 NEW BI TECHNOLOGIES 7246 R2K L.25 POTENTIOMETER RESISTOR D238176

LOT 10 NEW CARLON E978G 1-1/4IN NONMETALLIC TWO HOLE CONDUIT SNAP TRAP B241335

NEW VIRAJ 1 STD 300 LB B16 A/SA182 F316/316L 71932 STAINLESS FLANGED453813

LOT 100 NEW B-LINE ACS-25-125F 1/4X1-1/4IN FLAT HEAD CONCRETE SCREW D482393

NEW CASTOR WHEEL 1-1/4X3-7/8X1-3?/16IN D398510

NEW F&H FOOD EQUIPMENT BPT-684 SANITARY GASKET 3/4 IN THICK D434154

NEW THOMAS&BETTS RC10-38X STA-KON SET OF 50 YELLOW 3/8IN RING TERMINAL D454079

LOT 63 NEW 3/8IN BRASS HOSE TUBE BARBED COUPLER D483892

LOT 8 NEW LIGHTNIN 206 RETAINER RING D474916

NEW SOMEC X22318 BLOCK PLATE STEEL 1-1/2X1-1/2X1/4?IN D290233

NEW LANTECH 40018602 PLASTIC WIPER FLAP CUTTER 32X5IN D384759

LOT 11 NEW VISHAY 150D684X9035A2 CAPACITOR 0.68UF 35V-DC D481601

LOT 4 NEW GATES 5L580 TRUFLEX 3580 58 X 21/32IN V-BELT B368102

The use of the product:

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.