Petroleum Heat Resistant Powder Coating , Industrial High Heat Powder Coat

Powder coating for high temperature resistant

Introduction:

High temperature resistant coatings generally requires the film in 200 ℃ above does not change color, do not fall off, can still maintain appropriate physical properties of the coating. Usually, high temperature resistant coating is mainly composed of high temperature resistant resin, high temperature resistant paint, high temperature resistant fillers as well as the additives. The heat resistant powder coatings still is given priority to organic silicon powder coating

Application:

Chemical, petroleum, metallurgy, aviation and other industries.

Power Specification

Coating Specification

Carried Standard: JG 3042-1997; GB/T 25826-2010

Application Area: Can be widely used in Bridges, ports, airports, buildings, basements, high-speed rail, etc.

Applicable process: Electrostatic Coating

Notes:

1. Steel surface scale remove clean, reveal metal color; Steel surface roughness handling quality standard, appropriate for 50-70 - mm; Derusting grade level Sa2 1/2 (GB/T8923, no chloride attached on steel surface. Preheating: temperature should be controlled in 220-245 ℃.)

2. Product should be stored in ventilated, dry, indoor temperature below 27 ℃, away from heat, corrosive chemicals and chemical solvents, avoid bright light, the maximum stack height should not exceed 4 layers, avoid prolonged pressure, ensure airtight box. In case the clot and damp affects the fluidization performance.

3. As the product has high reactivity, it is recommended that storage period for 27 ℃ under 3 months for the best. Exceed shelf life, should be test its performance first.

Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was founded in 2011, is a large-scale research and development of powder coating and production-oriented enterprises. The mainly product is thermosetting powder coating. The company registered capital is 12 million RMB, currently has 120 employees, the company office located in Huayuan industry high-tech park, the factory is located in Xiqing district Zhangjiawo Industrial Park, the company owns 26 production line, the annual production capacity of 24,000 tons.
The company mainly produces epoxy powder coating, epoxy polyester powder coating, polyester powder coating, have more than 1,000 kinds of powder coating. Since the founding of the company has always adhered to the field of powder coatings for research and development direction, has been successfully developed and put into production "special radiator powder", "high-end bicycles (electric vehicles) special powder", "pipe special powder", "locomotive parts Surface spray powder "," valve powder "and many other special products, The sales volume are up to top ten for several years.

The company always provide customers with stable and reliable quality products, owns the ISO9001 quality, 14000 environmental management system certification. International advanced quality testing equipment, and fine processing technology formed a set of characteristics of the quality control process, good technical support and after-sales service system. "Quality is stable, consistent" has become the industry consensus on the quality of the company's products.