Grey / Blue Big Water Tank Ride On Floor Scrubber With Battery And Charger

Grey / Blue Big Water Tank Ride On Floor Scrubber With Battery And Charger

Features.

1. Transparent water level display tube, clear water volume at a glance

2. Do not pick the ground, easy to deal with, suitable for epoxy floor, floor, PVC floor, terrazzo, small square brick etc.

3. 850mm cleaning width, 1160mm suction width, car type operation, greatly reduce the labor intensity;

4. Low noise design will minimize the impact of cleaning on the surrounding area

5. Simple and convenient brush plate, suction and scraping operation, easy to understand

6. High cleaning efficiency, save time and effort, 5200sq.m/h work efficiency, cleaning effect is more clean

7. The mechanical lifting brush and suction handle are easy to operate with high reliability and low maintenance cost

8. Batteries can be maintained bu overturning recovery tank at 90 degrees without any tools.

9. Onboard smart charger with plug in charging without complicated connection

10. Various stains wash dry powder, dirt, oil, dust, mildew, skid marks,

1.After-sales

1.Technology instruction .

2. Overseas service viable.

3. Provide user manu

2. Smart board control and touch-screen button operation make the job easier and simple.

After each use, the dispensing (solution) and especially the collection (recovery) tanks should be emptied and rinsed out to prevent dirt build up. Also, the

pads/brushes, vac hose, and squeegee should also be rinsed to prevent dirt build up. The vac motor should be run for several minutes afterwards to remove any moisture

that could be present in the vac motor to reduce chances of corrosion that could damage the vac motor. Failure do to this maintenance could cause in a loss of vacuum

airflow and increase in costly repairs.

Dycon Cleantec Co.,Ltd.., is the professional producer for floor scrubber dryer in China, also the member of the ISSA(Worldwide Cleaning Industry Association).Dycon is committed to R&D and producing cleaning equipments, with independent product development capability. We are also accept OEM and ODM product development.

Dycon focuses on designing and producing floor scrubber dryer, pay attention to quality. All the machines are designed by our own, the metal chassis is cutting by Laser, which brings precision and high interchangeability of spare parts. Our products absorbs the international mainstream product advantages, synchronized with worldwide style. With CE approved, our products enjoy a good reputation in the America, Eastern Europe, Oceania, Southeast Asia etc. markets. And we hope to provide our service to more customers around the world.

Here in Dycon, we consider customer's interests, customer's demand as the center, cooperating with Dycon, you will obtain a good regional protection ,qualified product, good service, also you will have a continuous development of product platform.

Dycon is your trust partner, join our dealer team, you will obtain more.