| Sign In | Join Free | My benadorassociates.com |
|
| Sign In | Join Free | My benadorassociates.com |
|
| Categories | Heat Shrink Wire Terminals |
|---|---|
| Brand Name: | KUAILI |
| Model Number: | Caps For Cables |
| Certification: | ROSH |
| Place of Origin: | China |
| MOQ: | consult |
| Price: | consult |
| Payment Terms: | D/A, D/P, T/T, L/C |
| Supply Ability: | 50000 per week |
| Delivery Time: | 5~30days According to the order quantity |
| Packaging Details: | 100pcs/bag or as customer's requirement. Outer packing export carton with size is 45.3*25.8*19.8cm it depends on the goods. |
| name: | Adhesive-Lined Insulating Caps |
| Color: | Black and transparent |
| Rated Voltage: | 600V |
| Tensile Strength: | 14MPa |
| Start to shrink: | 30.35mm |
Mini Heat Shrink adhesive-lined Cap /wire end caps for cable
Applications:Specially designed to provide mechanical and environmental of stub splice in electrical harness. Clear caps allow see-through inspection. Black caps are flam-retardant.
Characteristics:4:1 shrink ratio allows a few sizes to cover a wide
range of splice and component diameters.
Mechanically tough jacket provides strain relief and abrasion
protection.
Thick adhesive liner forms an effective barrier against fluids and
moisture and performs well at an extended temperature range.
Operating temperature range:Operating temperature:-40 ℃ to 105 ℃
Minimum shrink temperature: 100 ℃
Minimum fully recovery temperature: 135 ℃
Colors:Black (Standard), Clear(Standard)
Size selection
Always order the largest size that will shrink snugly over the
component to be covered
Other cap lengths available on request.
AMC-E
| Inside diameter(including core) | Recovered thickness | |||||
Part Number | Standard Length as supplied (mm | Minimum Expanded as supplied | Maximum Recovered After heating | Minimum total wall After heating | Minimum jacket wall after heating | Minimum adhesive wall after heating |
| AMC-E-1 | 30.35 | 5.72(0.225) | 1.27(0.050) | 1.20(0.047) | 0.64(0.025) | 0.56(0.022) |
| AMC-E-2 | 30.35 | 7.44(0.293) | 1.65(0.065) | 1.52(.0060) | 0.76(0.030) | 0.76(0.030) |
| AMC-E-3 | 40.50 | 10.85(0.427) | 2.41(0.095) | 1.91(0.075) | 0.89(0.035) | 1.37(0.054) |
AMC-D
| Length | Inside diameter | Recovered wall thickness | ||||
Part Number | Size | Nominal overall as supplied | Minimum open barrel as supplied | Minimum expanded as supplied | Maximum recovered after heating | Total wall after heating |
| AMC-D-1 | 1/8 | 22.0(0.87) | 12.7(0.50) | 3.2(0.125) | 0.58(0.023) | 1.22±0.15(0.048±0.006) |
| AMC-D-2 | 3/16 | 25.4(1.00) | 15.2(0.60) | 4.8(0.187) | 1.52(0.060) | 1.57±0.20(0.062±0.008) |
| AMC-D-3 | 1/4 | 28.4(1.12) | 15.2(0.60) | 6.4(0.250) | 2.03(0.080) | 1.98±0.20(0.078±0.008) |
| AMC-D-4 | 3/8 | 31.8(1.25) | 18.3(0.72) | 9.5(0.375) | 2.29(0.090) | 2.08±0.25(0.082±0.010) |
| AMC-D-5 | 1/2 | 38.1(1.50) | 21.6(0.85) | 12.7(0.500) | 2.29(0.090) | 2.54±0.25(0.100±0.010) |
|
Water Proof Heat Shrink Wire Terminals / Mini Cap Seal Pa Insulation
Insulation Sleeving Heat Shrink Wire Terminals / Low Voltage Adhesive-Lined Insulating Caps
Mini Heat Shrink Adhesive-Lined Cable / Wire End Caps Uv Resistant
Waterproof Green Heat Shrink Wire Terminals With Hot-Melting Plastic Coils
IP67 Heat Shrink Wire Terminals Splicing Wire , Operating Temperature -40 ~125 Degree
IP67 Solder Sleeve Wire Splices , Solder Grip Closed End Connector
Male and female heat shrink solder butt connectors PE waterproof AWG 16-14 Blue
Yellow Heat Shrink Insulated female to female wire connector MDD5-250 FDD5-250
HR type insulated electrical heat shrink ring terminals Red HR1.25-5
Terminal Ring Electrical wire connectors heat shrink HR 2-6 16-14 AWG Blue
