High Flitering Efficiency Anti Dust Face Mask , Disposable Non Woven Face Mask

FFP1V Save Mask ,Valved Dust Mask ,Disposable Face Mask With CE Certificate

1 . Material of each layer

Outer layer : Protective PP spun-bonded non-woven

Middle layde : FFP1 melt blown filter(have filter efficiency level of 80%)

Inner layer : Shaped needle punched cotton

2 . Descriptions

FFP1V Dust Mask has filtering facepiece particulate respirator - Collapse resistant shell for increased durabilty - Compatible with a variety of protective eyewear and hearing protection - Adjustable noseclip helps provide a custom and secure seal - Two-strap design helps provide a secure fit.

3. Directions for use

• The mask is only for single use .
• The mask should't be removed from its packaging until its required for use.
• Use the respirator in accordance with applicable health and safety regulations.
• Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
• Fit the respirator and check leak-tightness before entering the contaminated area.
• Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
• As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.
• If maintained as per storage instructions , product can be used up to 5 years from date of manufacture.

​

4 . Recommended applications include:

• Cutting and Casting of Metals

• Disposal of Toxic Waste

• Hospital

• Iron and Steel Industry

• Laboratory and Disease Control

• Manufacture of Batteries

• Pharmaceutical industry

• Textile industry

• Underground Civil Engineering

• Woodworking

• Welding work

Dongguan Wecare Medical Stech Co.,Ltd, a member of Kuasu group;

Was established in 2011, we offer a wide selection of products ranging from dust masks, protective masks, foldable masks, surgical masks, N95 respirator and KN95 Masks, etc.

Mask material, ozone air sterilizer and Automtic Mask making machines are direct partnered with manufacturers, that makes us able to provide one-stop service to our customers!    

We have a good strong and energetic team that enjoys high reputation from our buyers and partners all over the world, with their professional experience, quick service and efficient solution.

Since the COVID-19 outbreak, we have shipped millions of masks to our cusotmers over in USA, Canada, Germany, Norway, Italy, Austria, UK, Australia, Ireland, Czech and many other countries. Our company has 5 production lines and the daily capacity is around 500,000 pcs of N95, KN95 or disposable masks.