ABEC 1 OD115mm SS Ball Bearings For Food Processing Machine

Stainless Steel Bearings for Food Processing Machinery SS6000 Series

Open/Seals/Shields Type - Anti-Corrosion

Materials: AISI440C Stainless Steel

Hardness: HRC58-62

Preccision Grade: ABEC-1, ABEC-3

Vibration: Z1,Z1, Z3

Bore Size: 10mm - 75 mm

OD: 26 mm - 115 mm

Width: 8 mm - 20 mm

Introduction :
Stainless steel ball bearings are machined components that include an outer ring, inner ring, balls, retainers, shields and snap rings. miniature ball bearings are available in inch and metric sizes, open or shielded and flanged or unflanged. For extreme noise sensitive applications, superior hardness and corrosion resistance. Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.
In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.
Stainless steel ball bearings bring unique capabilities for food processing and packing, beverage, medical and marine equipment.

Applications:

The bearings are widely used on ocean engineering equipment and ship, food processing machinery, medical equipment, cryogenic engineering, automobile, motorcycle, electric tools, high-speed motor, household appliances and other industries.

Lubrications:

Before SGC bearings leave factory,the open bearing is filled with meter anti-rust oil only;while the shielded bearing has been filled with general bearing grease,which makes it suitable for light and medium load as well as low and medium speed applications, with a working temperature ranging from -30℃～100℃.If the bearings are applied beyond the above conditions, other special grease or lubricating methods shall be employed.

Our Mission

Our mission is to build solid, reliable products, provide exceptional service, re-invest in technology and make a dedicated effort to understand the needs of our customers while providing a positive workplace for our employees.

Our philosophy is to design, manufacture and sell our products with all markets in mind. You will never be limited to one application with our products.

Who We Are

For more than 15+ years, Zoomland has grown into a manufacturer and exporter of standard and custom bearings, with focus on research and development of the best products for specific applications. We enjoy working closely with designers and engineers to figure out how to address out a complex manufacturing issue.Furthermore, we’re value-driven and easy to work with. We’re always in mind that our solutions must satisfy our customers even may save their money by reducing manufacturing costs.

How We Can Serve You

We has implemented a total quality control system at our facilities, and manufactures in high volume to a just-in-time program.

To serve the ongoing needs of customers, we built high-efficient sales team to communicate with our customers so that our customers will get full information about our products within 24 hours.

We’re proud of our long-term relationships with our customers.