Product Details
Company Profile

Gold Anodized H32 2mm 6mm 5052 Aluminium Alloy Sheet

Gold Anodized 5052 H 32 1.5 mm 2 mm 6 mm Aluminium Alloy Sheet For Decoration

Product Description

According to different surface treatment methods, aluminum alloy coil can be divided into Mirror surface aluminum plate, Brushed aluminum plate, Anodized aluminum plate, PE coated aluminum plate, PVDF coated aluminum plate etc.

After anodizing, the surface of the aluminum can produce a few microns-hundreds of microns of oxide film. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decorative properties have been significantly improved and improved. In fact, the direct current sulfuric acid anodic oxidation method is the most common application, because it is suitable for aluminum and most Anodizing of aluminum alloy; thicker film, hard and wear-resistant, better corrosion resistance after sealing; film colorless and transparent, strong adsorption capacity, easy to color; lower processing voltage, less power consumption ; The treatment process does not need to change the voltage cycle, which is conducive to continuous production and practical operation automation

Chemical Composition

ALLOY	CHEMICAL COMPOSITION (%)
ALLOY	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Zr	Other		Al
3003	0.6	0.7	0.05-0.2	1.0-1.5				0.1			0.05	0.15	rest
3004	0.3	0.7	0.25	1.0-1.5	0.8-1.3	__	__	0.25	__	__	0.05	0.15	rest
3104	0.6	0.8	0.05-0.25	0.8-1.4	0.8-1.3	__	__	0.25	0.1	__	0.05	0.15	rest
3105	0.6	0.7	0.3	0.3-0.8	0.2-0.8	0.2	__	0.4	0.1	__	0.05	0.15	rest
5052	0.25	0.4	0.1	0.1	2.2-2.8	0.15-0.35	__	0.1	__	__	0.05	0.15	rest
5A06	≤0.40	0.000～0.400	≤0.10	0.50～0.8	5.8～6.8	__	0.0001～0.005	≤0.20	0.02～0.10	__	0.05	0.1	rest
5005	0.3	0.7	0.2	0.2	0.5-1.1	0.1	__	0.25	__	__	0.05	0.15	rest
5050	0.4	0.7	0.2	0.1	1.1-1.8	0.1	__	0.25	__	__	0.05	0.15	rest
5154	0.25	0.4	0.1	0.1	3.1-3.9	0.15-0.35		0.25	0.2		0.05	0.15	rest
5754	0.4	0.4	0.1	0.5	2.6-3.6	0.3	__	0.2	0.15	__	0.05	0.15	rest
5454	0.25	0.4	0.1	0.5-1.0	2.4-3.0	0.05-0.2		0.25	0.2		0.05	0.15	rest
5182	0.2	0.35	0.15	0.2-0.5	4.0-5.0	0.1		0.25	0.1		0.05	0.15	rest
5083	0.4	0.4	0.1	0.4-1.0	4.0-4.9	0.05-0.25	_	0.25	0.15	__	0.05	0.15	rest
5086	0.4	0.5	0.1	0.2-0.7	3.5-4.5	0.05-0.25		0.25	0.15		0.05	0.15	rest
6060	0.3-0.6	0.1-0.3	0.1	0.1	0.35-0.6	0.05		0.15	0.1		0.05	0.15	rest
6061	0.4-0.8	0.7	0.15-0.4	0.15	0.8-1.2	0.04-0.35	__	0.25	0.15	__	0.05	0.15	rest
6063	0.2-0.6	0.35	0.1	0.1	0.45-0.9	0.1	__	0.1	0.1	__	0.05	0.15	rest

Aluminium Material Grade

1)1000series aluminium /Pure Aluminum/Pure Aluminium:1050,1060,1070,1080,1100,1350,etc

2)2000series aluminium alloy/Hard Aluminum/Hard Aluminium/Aluminum-Copper Alloy/ Aluminium-Copper Alloy:2011,2014,2017,2024,etc

3)3000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium/ Aluminum-Manganese Alloy:3002,3003,3104,3204,3030,etc

4)5000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium /Aluminum-Magnesium Alloy:5005,5025,5052,5040,5054,5056,5083,5152,etc

5)6000series aluminium alloy / Aluminum-Magnesium-Silicon Alloy /Aluminium-Magnesium-Silicon Alloy /:6101,6003,6061,6063,6020,6201,6262,6082,etc

6)7000series aluminium alloy/ Aluminum-Zinc Alloy/ Aluminium-Zinc Alloy:7003,7005,7050,7075,etc

7)8000series aluminium alloy:8011,etc

Mechanical properties:

Alloy	Temper	Thickness(mm)	Tensile strength(Mpa)	Yeild strength(Mpa)	Elongation(%)
Alloy	Temper	Thickness(mm)	Min
5052	H111 O	>0. 20 — 0. 50	170 — 215	65	12
		>0. 50 — 1. 50			14
		>1.55 — 3.00			16
		>3. 00 — 6. 00			18
		>6.00 — 12. 50	165-215		19
		>12. 50 — 50.00	165-215		—
	H12	>0. 20 — 0. 50	210 — 260	160	4
		>0.5-1.5			5
		>1.50 —3.00			6
		>3, 00 — 6. 00			8
	H14	>0. 20 — 0. 50	230-280	180	3
		>0.50-1.50			3
		>1. 50 -3. 00			4
		>3.00 — 6.00			4
	H16	>0. 20 — 0, 50	250—300	210	2
		>0. 50 — 1. 50			3
		>1. 5- 3.0			3
		>3.00 — 4. 00			3
	H18	>0. 20-0.50	270	240	1
		>0. 50 — 1. 50			2
		> 1.50 — 3.00			2
	H22 H32	>0. 20—0. 50	210 — 260	130	5
		>0. 50-1.50			6
		>1.50 — 3.00			7
		>3. 00 — 6. 00			10
	H24 H34	>0. 20 — 0. 50	230 — 280	150	4
		>0.50 — 1. 50			5
		>1,50 — 3.00			6
		>3.00 — 6.00			7
	H26 H36	>0. 20 — 0.50	250 — 300	180	3
		>0. 50 — 1, 50			4
		>1.50—3.00			5
		>3. 00—4. 00			6
	H38 H28	>0. 20 — 0, 50	270	210	3
		>0. 50~1. 5			3
		>1. 50 — 3. 00			4
	H112	>6.00—12. 50	190	80	7
		>12. 50 — 40,00	170	70
		>40, 00 — 80, 00	170	70

Product Photo

Company Introduction

Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd
1650mm Slitting machine	Uncoil(MM)				Finished size(MM)		Slitting Width(MM)
	ID	OD	Width	Thickness	ID	OD	Above 0.5mm≥ 20mm
	Φ 400	≤ 1800	≤ 1600	0.5-4.5	Φ 400	≤ 1700(normal)
	Φ 500				Φ500(normal)
	Φ 600
Aluminum foil Slitting machine	Uncoil(mm)				Finished size(MM)
	ID	OD	Width	Thickness	ID	OD	Width
	Φ 76	≤ 550	≤ 1200	0.08-0.12	Φ76Φ76	≤ 550(normal)
1450mm Crosscutting machine	Uncoil(MM)				Finished size(MM)
	ID	OD	Width	Thickness	ID	OD	Width
	Φ 505	≤ 1780	≤ 600	0.1-1.5	Φ150 Φ300 Φ400 Φ500	≤ 1700(normal)	6-600
	Φ 605
Annealling Furnace	Furnace Temperature		Furnace Size
	≤440°C		320020002100
Saw Cutting	Thickness(mm)		Width (mm)			Length (mm)
	Size		Size		Tolerance	Size
	≤200		≤2000		±0.3	≤3000

Product Tags:


*From:	Your email address is incorrect!
*To:	Chongqing Dongchong Aluminum Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Aluminium Alloy Sheet
Brand Name:	Dongchong
Model Number:	5052
Certification:	MSDS,MTC,REACH,ROHS.FDA,SGS,ect
Place of Origin:	Chongqing,Dongchong
MOQ:	500-5000KG for different product
Price:	negotiable
Payment Terms:	L/C, T/T
Supply Ability:	10000tons per month
Delivery Time:	5-20 Days
Packaging Details:	Wooden pallet , Wooden Box
Alloy:	5052
Temper:	H 32,O,H 18,H 24,H 34,H 38,H 111,H 112,F,
Color:	Gold, silver, rose gold, champagne or customized
Usage:	Industrial Components
Sample:	free
Size:	Decoration
Protection:	Film on one side or both side , paper interleave