Automatic Water Shower Rain Spray Test Chamber Rain Test Equipment For IP GRADE IPX3 IPX4 Per IEC60529

Automatic Water Shower Rain Spray Test Chamber

Rain Test Equipment for IP GRADE IPX3 / IPX4 per IEC60529

Sanwood Rain Chamber is to test the physical and other related properties of electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts under simulated rainy weather conditions. After testing, the performance of the product can be judged by verification, so as to facilitate the design, improvement, verification and delivery inspection of the product.

Based on the spray way, the rain chamber has many different

IPX3/4 Swiping Pipe Rain Test:
1. Meet the requirement of c standard IPX3 water pouring test and IPX4 water splash test.
2. The test sample will be put or installed on the center of the half-round sinuous pipe and make the bottom of the test samples and the oscillating axis in a horizontal position. During test, the sample would spin around the center line.
3. Swing pipe standard configuration: R400mm and R500mm two types. Swing pipe inner diameter: Φ15mm. DillΦ0.4 holes and make the water spray to the center. The water pressure of the device entrance is equal to 10m water level, spraying water pressure is 80-100kpa.
4. Water spraying pipe swing angle: 120º,180º,360º, Vertical sides: 60º,90º,175º.
Complete a swing(2*120º) time is 4S.
Complete a swing(2*360º) time is 12S.
5. Can manual default the test parameters, complete testing automatically shut off the water supply and

pendulum pipe Angle automatic zeroing and automatic eliminate seeper, avoid scale blockage needle tip.
6. Use Mitsubishi PLC, LCD panel test procedure control box, stainless steel curved pipe, alloy aluminum frame, stainless steel shell.
7. Servo drive mechanism, guarantee the pendulum pipe Angle of precision, the overall pendulum tube structure for hang a wall.

Technical Specification

SANWOOD PRODUCTION

SANWOOD Environmental Chambers was established in 1995, which integrated Taiwan and Japan technologies. We have been focus on the most secure and reliable climatic test chamber technology since established.

OUR EXHIBITION

Our products upgrade constantly and our customers come portable batteries, power batteries, battery, lithium batteries, lead-acid, new energy vehicles, electric bicycles, electric tools, electric systems, solar, military, universities research and other technology industries fields.

CUSTOMER WITNESS

Products are exported to more than 60 countries, such as Russia, Singapore, the United States, Turkey, Denmark, Vietnam, India, Malaysia, Kazakhstan, Austria, Canada, etc.

SANWOOD CULTURE

Sanwood thrived little by little and aims to become the leading brand in the safety and reliability environmental test equipment industry all over the worldber.

Guangdong Sanwood Technology Co., Ltd, founded at 1995, with 25 years manufacturing experience, we are now engaging 100+ workers and 20+ engineers (structure, refrigerant, assembly, quality control, pre-tests), 2 production lines with facility 6,000+ square meters, monthly capability reaches to 120 units which makes annual production capability more than 1,000 units. Products cover the full range of battery cells, modules and packs or even the whole automobile to run the environmental reliability tests.

Achieved national high enterprise reward, certified with ISO9001:2015, ISO14001:2015 and CE certificate, our products are exporting to more than 60 countries and regions, cooperated with top manufacturers in the EV lithium-ion battery industry such as ATL, BYD, CATL, Envision AESC, Farasis, Lishen, Sunwoda, Svolt and major playes in the European markets.

Customer service is as important as product quality, we are planning to build our European sales & service center to further iron our instant and efficient after-sales services for our clients.

Sanwood, born to provide high quality products! Leave us a message or give us a call TODAY to propose you a tailored test solutions.