CA76T CA76T010-300 CA76T010-305 3'' Inch Baghouse System Pulse Jet Valve

CA76T CA76T010-300 CA76T010-305 3'' Inch Baghouse System Pulse Jet Valve

Right Angle Pulse Valve Working Principle:

When the pulse solenoid valve is opened, the air in the air bag enters the blow pipe through the pulse valve, and is sprayed to the filter bag, so that the dust bag is rapidly expanded, and the dust on the dust bag is shaken off, the dust bag is clean and the air permeability is improved, and the dust remover is cleaned. continue working. For the case that the valve opening is only closed for a short time, the normally open pulse

solenoid valve should be used. When used in short-term work and large batch sizes, special orders can be made to reduce power consumption.

Controlled by the output signal of the pulse blowing controller, the filter bags are cleaned one by one, the large particles fall directly into the ash bucket, and the small particles adhere to the filter bag. When the dust on the filter bag is too much, the gas permeability is not good. The negative pressure of the precipitator is too large, the differential pressure controller gives a signal to the PLC, then the PLC automatically starts the pulse valve, the pulse valve will automatically open, and the filtered static air enters the upper tank to discharge, so that the resistance of the precipitator remains at the set Within the scope to ensure the processing capacity and dust collection efficiency of the dust collector.

Technical Data of Goyen Pulse Jet Valve:

Main Dimension:

CA RCA Series Pulse Jet Valve For Dust Collector System:

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on