2W Series 1-1/2'' Inch 2W400-40 UW-40 Pilot Diaphragm Solenoid Valve

2W Series 1-1/2'' Inch 2W400-40 UW-40 Pilot Diaphragm Solenoid Valve

Technical Data of 2W & 2S Solenoid Valve:

Main dimension of 2W & 2S Series Solenoid Valves:

Pilot Operated Valves

This type of valve is provided with a 2-Way pilot solenoid operator. A diaphragm or piston provides the seal for the main seat. These valves are used for switching pressures in conjunction with orifice sizes larger than those available with direct-acting valves. The floating diaphragm construction requires a pressure drop across the main valve seat to remain in the open position, or a coupled diaphragm or piston which is mechanically held open by the solenoid plunger (i.e. Chem-o-sol). The coupled type will operate with zero pressure drop across the main valve seat. An Internal Pilot Operated 2-Way valve.

When the solenoid is energized, the plunger opens the pilot orifice and relieves pressure from the top of the diaphragm to the outlet side of the valve, through the pilot channel in the main body. This results in an unbalanced condition which causes the main line pressure to lift the diaphragm off the main seat, thereby opening the valve.

When the solenoid is de-energized, the pilot orifice is closed and full line pressure is applied to the top of the diaphragm, through the bleed orifice located in the diaphragm, from the inlet side of the valve, thereby providing a seating force for tight shut-off. As long as a pressure differential exists between the inlet and outlet ports, a residual shut-off force is available by virtue of the larger effective area on the top side of the diaphragm.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on