Product Details
Company Profile

6 Zones 380V Hot Air Reflow Oven For PCB Soldering Machine

Hot Air Reflow Oven For PCB Soldering Machine SMT Welding Equipment

Introduction:

No.1 The unique advanced long life heating system

1. The heating system adopt the Swedish nickel heater with efficiency and energy-saving. The peak wave length of the

radiation power is 4UM with curved surface reflector to the rising temperature speed, improve the thermal efficiency. And the

special forced-air circulation system make PCB and the component heated uniform and eliminate the "shadow effect"

completely .

2. Using special high temperature resistant protection system in heating preservation system and special iron in furnace .

3. Using imported Taiwan SanYue long axis of high temperature fan motor and W shaped heat pipe, Model design, no noise,

shockless and easy for maintenance .

4. Whole oven are porous aluminum transfer the hot air to guarantee the hot air evenly to the PCB .the whole top oven fixtures

can open completely so that easy to clean the oven inside .

No.2 Smooth and reliable transmission system

1.The transmission system use STK adjustable speed motor imported from Taiwan matched with the 1:150 turbine reducer can

running smooth ,speed range can be arrived at 0-1500mm/min.

2. Independent wheel structure support and match stainless belt to make the running smoothly and the speed precision is up

to ±20 mm/min .

3.Special stainless belt: durable and wear-resistant, not easy to deform and long life.

No.3 Stable and reliable electrical control system

1. It adopts imported thermostat control which owns fuzzy control and PID intelligent precision control system.It can fast

response the changes in external heat and ensure more temperature balanced by PID intelligent operation and automatic

control heating .

2. Using thermocouple imported from Taiwan by each temperature zone, it can fast and sensitive induct the changes in each

temperature zone, transfer and control timely, compensate the temperature balance in each zone.

3 .Special SSR solid state relay matched with dedicated radiator improve the heat efficiency greatly and prolong the lifetime

effectively. No contact output and fuzzy control function by thermostat, can monitoring the changes of outside temperature

and calorific value, controlling the heating device by minimum pulse, ensuring the high precision of the temperature control &

the uniform temperature in internal and the length ,direction, temperature distribution, all of these meet IPC standards .

4. Power is abundant, heat up fast, it’s only need 20 minutes from room temperature to constant temperature.

5 .Failure diagnosis and sound light alarm.

6. Delay shutdown production function, uniform cooling after the shutdown: prevent component deformation.

Specification:

Heating System	Number of heating zones	UP 6/BOTTOM6
	Length of heating zones	2500MM
	Heating mode	hot air
	Cooling Mode	Force air
	Cooling zones	Up 1 bottom 1
Conveyor System	Max. Width of PCB	350mm
	Mesh belt width	400mm
	Transmission Direction	L→R(or R→L)
	Transmission Net Height	880±20mm
	Transmission type	Mesh and chain
	Range of rail width	0-300mm
	Conveyor speed	0-1500mm/min
	Auto/manual Lubrication	standard
	Upper hood method	Manual(option:auto)
	Fixed rail side	Front rail fixed(option: rear rail fixed)
	Components high	Top 30mm and bottom 25mm
Control system	Power supply	5line 3phase 380V 50/60Hz
	Total power	24kw
	Starting power	18kw
	Normal power consumption	4KW
	Warming time	About 20 mins
	Temp. setting range	Room temperature-300℃
	Temp. control method	PLC & PC
	Temp. control precision	±1℃
	Temp. deviation on PCB	±2℃
	Data storage	Process Data and status storage(80GB)
	Nozzle plate	Aluminum Alloy Plate
	Abnormal Alarm	Abnormal temperature. (extra-high/extra-low temp.)
	Board dropped alarm	Tower light: Yellow-warming, Green-normal, Red-abnormal
General	Dimension(LWH)	3600×1100×1490mm
	Weight	900KG
	Color	Computer gray

Product detail

SMT nitrogent Reflow Oven Control System And Heating System:

1.Siemens PLC+industrial PC with precise controlling unit and stabilezed performance

2.The longer heating zones able to get high prodction offciency and throughput.

Reliable Conveyor System:

1.The rail is dealt with hardened process to make it more stability.

2.The conveyor chain adpoted with single Pin-plate design,Simple and practical.

Product Tags:


*From:	Your email address is incorrect!
*To:	YUSH Electronic Technology Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Solder Reflow Oven
Brand Name:	YUSHUNLI
Model Number:	YUSH M6
Certification:	CE ISO
Place of Origin:	China Dongguan
MOQ:	1set
Price:	USD1000~10000
Payment Terms:	L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability:	200Sets/Month
Delivery Time:	5-7work days
Packaging Details:	plywooden case
Usage::	PCB Soldering
Voltage::	380V
Dimensions::	3600×1100×1490mm
Rated Duty Cycle::	100%
Rated Capacity::	36KW
Current::	50/60Mhz
Weight (KG)::	900 KG
Heating Zones::	6 Zones
Application::	SMT Line
Function::	reflow oven
Range of Rail Width::	50-400mm