Low Noise 10kw Self Suction 3 Meters Water Vacuum Pump

Vacuum Pump

Description:

The vacuum pump refers to one suction (water) nozzle and one exhaust nozzle (water) with one inlet and one outlet, and it can continuously form vacuum or negative pressure at the inlet;A slight positive pressure is formed at the exhaust nozzle;The working medium may be the gas, may also be the liquid, the volume compact one kind of instrument, often is called "the miniature vacuum pump", also referred to as "the vacuum pump".

Principle:

The basic principle of the micro vacuum pump: circular motion of the machine, by mechanical device inside the pump diaphragm do reciprocating motion, thus to fixed volume of air in the pump cavity vacuum (negative pressure), was formed by compression, stretching in the pump suction port at atmospheric pressure to produce pressure difference with the outside world, under the action of pressure difference, the gas pressure (suction) into the pump chamber, then discharge from the vent.

Features:

Vacuum pump has the characteristics of micro vacuum pump, also has the advantages of micro self-priming pump, so it can run idle for a long time, dry run and other occasions, unlike the general pump idle, or dry run will damage the pump.Moreover, it is small in size, low in noise, free of maintenance, and can run for 24 hours continuously. Therefore, micro-vacuum pump has been widely used in medical treatment, sanitation, scientific research, environmental protection and other fields.

Vacuum pump - water - gas dual - purpose, small volume, low noise pumps

1. Main features: High temperature resistance (100 degrees);Ultra small in size;Can be idle for a long time, dry rotation, pumping, pumping air;

2. Strong suction (self-suction up to 3 meters), large flow (1.3l /Min), low noise.

3. It can operate continuously for 24 hours;Long-term idling is normal work, will not damage the pump;Especially suitable for air and water occasions.

4. Oil-free, non-polluting working medium, maintenance-free, installation in any direction;

5. Functions: water and gas mixed medium, or can be directly pumped.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.