9mm 2000mm Length MDF Pegboard Sheets For Echo Reduction

Jintong Perforated MDF Board Price Cheap and Fine Acoustic Panel

Acoustic Perforated MDF board has excellent echo reduction effect. The MDF acoustic panel is a wood panel with holes, there are

two types of perforated MDF acoustical sound board: one is drilling hole until the end, the other is large and small holes, which

means that the diameters of the holes on both sides of are not the same.

Product Paramenters

Acoustic MDF Board Specification

---

Structure Base Material, Finish & Back Finish
Basic Material Fireproof, Eco-friendly
Front Finish Melamine, Natural Wood Veneer, Paint, etc.
Back Finish Black acoustic fleece
Standard Size 600*1200mm, 600*600mm, 2440x128mm
Standard Thickness 15/ 18 / 12mm MDF acoustic panel
Standard Pattern 16-16, 32-32, 8-8 (higher cost)
Acoustic Principle Resonance Absorption
Eco-Friendly China and EU standard class E1
Fire Resistance China and EU standard class B
Function: MDF acoustic ceiling board, perforated MDF wall board

Single Sided E0 MR MDF is a wood based panel and reacts to changes in moisture like natural timber, ie. high or low humidity may cause some expansion or contraction without any degradation to the strength of the board.

Single Sided E0 MR MDF is recommended for interior use only.

Applications

Pegboard Display can be overlaid with vinyl, timber veneer or a paint system. It is used to make cupboard doors, cupboardend panels and other applications where panels are required to be decorated on one side.

Single Sided E0 MR MDF panels are manufactured with a specific pre-stressed bow to cater for correction factors that arisein the application of different decorative surfaces to the non-laminated face.

As the substrate is a wood based panel, it will react to changes in moisture as per natural timber, and hence humidity variations will affect the level of the bow. Exposure to moisture and/or heat (>100ºC for extended periods >1 min) may cause surface and edge disturbance.

Substrate and pre-stressed bow options.

Many factors will contribute to the overall stress applied to the non-laminated panel face and hence the resultant panel flatness. Theseinclude the decorative surface applied and the amount of face routing or modification to the non-laminated face. There are two Single Sided MDF board substrates available and each has different pre-stressed values to accommodate the various manufacturing factors.

Therefore, Laminex strongly recommends that trial panels be manufactured and subjected to the proposed environment before full-scale processing commences. Due to high risk of visual defect from minor surface distrubances the product used for high gloss applications should be prepared suitably.

    Guangzhou Panyu Jintong Wire Mesh Manufactory was established in 2009, located in Nancun Town, Panyu District, Guangzhou. It is close to Nansha Port and Huangpu Port, enjoying a superior geographical location and convenient transportation. After years of development and the support of friends, Jintong has become a professional mesh enterprise integrating research, development, manufacturing and sales, with advanced production equipment, testing equipment and professional technical personnel. Our main products are metal mesh series products such as perforated metal sheet, steel wire mesh, expanded metal mesh, chain link fence, PVC fence, security fence, barbed wire, steel grating, welded wire mesh woven wire mesh and so on. Special material and specifications can be customized according to customers' requirements.

    Pursuing quality and creating excellence are our struggle goals; Integrity, Pragmatism, and Development are our business philosophy; Customer-oriented, Serving the world is our entrepreneurial spirit; Win-win, Mutual Benefit is our cooperative thinking. Sincerely look forward to cooperating with you.