Water Based Liquid 29*29 inches size solder paste stencil Cleaning Machine for stencil and misprinted PCB

SHENHUA is a leading smt stencil cleaner manufacturer company in China. We make pneumatic stencil cleaning machine, electric spray cleaning machine and ultrasonic stencil cleaning machine. We've installed over 800 sets in domestic and overseas customer's factories. We sold 100 sets SME-750 pneumatic stencil cleaning machine in 2020.

Machine Description

SME-800 Water Based Liquid 29*29 Inches Size Mis Printed PCB Cleaning Machine And Stencil Cleaning Machineis an automatically, water base liquid clean and DI water rinse machine. It can clean stencil size up to 29*29mm.

Liquid and water can add and discharge automatically.

SME-800 Multiple application: solder paste stencil, red glue stencil, 3mm thickness red glue cooper stencil, 3mm red glue plastic stencil, mis-printed PCB and squeegees.

SME-800 cleaning process: water-based liquid wash--DI water rinse--hot air blow dry.

SME-800 has the stable mechanism structure--4 cleaning spray rods and 4 air knives fixed at the left and right side of stencil; stencil move back and forth in the cleaning cabinet..

Machine Features:

1. Process: water-based liquid wash + DI water rinse+ hot air blow dry process.
2. Multi-use: solder paste /red glue stencil, red glue cooper stencil/ plastic mask, mis-printed PCB, squeegee.
3. Stable mechanism: stencil moves back and forth in the wash cabinet while spray rods and air knives fixed.-- make the machine stable and relaible.
4. Excellent cleaning result: up to 4~5kg/cm2 spray pressure and high volume nozzles, very good cleaning result.
5. Real time filtrer system: liquid and water can be recirculated used, no solder balls comes back to stencil surface again. Especially for precise stencil.
6. Less distance, more efficient:4 spray rods and air knives fixed on left and right side of stencil, 750mm long stencil move distance reduce to 420mm.
7. Pressure meters : cleaning liquid / rinse water/liquid filter/water filter pressure meters on front panel,easy to watch and monitor them.
8. SUS304 stainless steel structure:alkalic and alkacid corrision protection. All pipes, fIlter barrel and pumps are sus304 material, no plastic pipes at all.

9. One key easy operation: just push “start” key, all process are running automatically according to program setting.
10. Visible: window on right side of clean chamber, all process are visible.
11. Liquid cost down: Compressed air blow out remain liquid in pipes and pumps after cleaning process , save up to 50% liquid.
12. PLC control, TP English operation interface: clean time, temp;rinse time, temp; dry time, temp...parameters easy to set and modify.
13. Auot liquid and water add and discharge function:Equipped with air pump liquid/water add and discharge automatically.
14. World famous, high quality parts from Scheidier, Mitsubish, Omron, SMC, CKD.
15. LS protection: 4 levels liquid and water levle switch, low level to protect heater, pumps,M and H level remind to add liuqid or water,HH level to protect overflow.
16. Heaters temp control: PID calculattion , ±3°accuracy,over temp protection.
17. Water open loose and close loop: both this 2 loops can be choosed to use.
18. Excellent software function: auot/manual mode, I/O ports, paramenters setting,filter replace reminding...

Machine Spec:

Questions and Answers:

Q1. Why choose this electric stencil cleaning machine?

A1: Because SME-800 use water-based liquid which is safety, environmental-protection and easy to rinse.

Q2: Can SME-800 clean 3mm thick red glue printed cooper stencil and palstic mask?

A2: Yes, it can because its powerful cleaning pressure can penatrate very little holes in the stencil and mask to wash the red glue out.

Q3: Is it very dry after wash, rinse and dry process?

A3: Yes, it is very dry because hot air temperture and air blow result.

Q3: How SME-800 clean mis-printed PCB, squeegees and frameless stencils?

A4: By using our mis-printed PCB fixture, squeegee fixture, frameless stencil fixture.

Cleanin result comparison before and after cleaning:

  SME staff insist on research and develop high quality and smart cleaning equipments for electronic industry.

  In SMT cleaning feild: we have installed stencil cleaning machines, nozzle cleaning machines, misprinted PCB cleaning machines,

squeegee cleaning machines and solder wave oven fixture cleaning, reflow oven cooler cleaning machines, PCBA offline cleaning machines

and PCBA in line cleaning machine, PCB inline cleaning machine.

In screen cleaning feild: we have installed Screen cleaning machine, screen developping and stripping machine, ink squeegee cleaning

machine.

  In semiconductor field: we have BGA water cleaing machine, IPM,SIP, FC,PLP,WLP, 3D package cleaning machine, Cassette ultrasoinc cleaning machine,widely used in SMT, PCB, TP, Semiconductor, solar, photovoltaic and other industires.

  With the tenet of “Quality, professionalism, innovation and service”, SME aims to develop and expand intelligent precision cleaning and

cleaning equipment. We look forward to cooperating with you for a better tomorrow.