220V Disinfectant Online Chlorine Analyzers Swimming Pools IP66

220V Disinfectant Chlorine Controller Used In Swimming Pools IP66

Brief Introduction

• The chlorine controller is applied to online monitoring of chlorine concentration in drinking water and industrial process water disinfection and sterilization process, sewage treatment and circulating cooling water treatment, and can also be used in swimming pools and other places where chlorine concentration needs to be measured.

• Each DUC series of chlorine instruments is pre-installed with a set of embedded software to adapt to different chlorine digital sensors.

• The DUC2-CL-S-A chlorine controller has a 3.2-inch display screen and uses a 128*64 black and white graphic dot matrix LCD liquid crystal display, with reasonable interface settings and simple operation.

• The enclosure protection grade of this controller is IP66. This material can effectively isolate the pollution and corrosive gas from the external environment.

• It is equipped with a two-wire RS485 interface, the communication protocol is MODBUS RTU, and supports JSON text data format.

• The chlorine instrument has 2 SPST multifunctional relays that can be set and 2 high-precision 0/4~20mA current outputs.

Advantages Of The Chlorine controller

1. This disinfectant chlorine analyzer is equipped with OTA download technology, using wifi; GSM; CDMA, and other wireless technologies to realize remote software upgrades, fault diagnosis, and assistance in instrument parameter configuration for customers. It not only reduces the workload of on-site service of the instrument but also minimizes the time that users wait for service.

2. The chlorine controller has a clock function and a historical data recording function, which can record 14,000 historical data, and the recording interval can be set between 1 and 999 minutes.

3. Its menu password can be set to facilitate user's data confidentiality.

4. The shell material of the chlorine instrument is reinforced ABS, the shell is strong, corrosion-resistant, and wear-resistant. The overall size of the DUC chlorine analyzer is 144*144*120mm, and the user can choose a variety of installation methods such as wall-mounted installation, pipe clamping installation, and panel installation.

5. The chlorine instrument has a power-off protection configuration, and the parameters can be kept indefinitely.

Applications

The chlorine controller is applied to online monitoring of chlorine concentration in drinking water and industrial process water disinfection and sterilization process, sewage treatment and circulating cooling water treatment, and can also be used in swimming pools and other places where chlorine concentration needs to be measured.

Technical Parameters

The Matching DRFN Chlorine Sensors Recommendation

• Model: CL4.2

• pH range: 6~8

• Pressure range: 0~1 bar, no pressure surges or fluctuations
• Temperature range: 0~ 45℃ (no ice crystals in measurement water)
• Integrated automatic temperature compensation
• Response time: T₉₀ about 30 seconds
• Flow rate: about 30 l/h, low flow-dependence

• Shaft length: standard 175 mm

• Connection: Modbus RTU with M12 male
• Material: PVC-U and semipermeable membrane

• Applications: Fresh water free of surfactants and with constant pH

• Model: CC1

• pH range: 4~12

• Pressure range: 0~0.5 bar, no pressure surges or fluctuations
• Temperature range: 0~ 45℃ (no ice crystals in measurement water)
• Integrated automatic temperature compensation
• Response time: T₉₀ about 2min
• Flow rate: about 30 l/h, low flow-dependence

• Shaft length: standard 175 mm

• Connection: Modbus RTU with M12 male
• Material: PVC-U, PEEK, stainless steel 1.4571, microporous hydrophilic membrane

• Applications: Fresh water and seawater; surfactants are tolerated in part; a special electrolyte is used for seawater

• Model: CS4

• pH range: 4~9

• Pressure range: 0~3 bar, no pressure surges or fluctuations
• Temperature range: 0~ 45℃ (no ice crystals in measurement water)
• Integrated automatic temperature compensation
• Response time: T₉₀ about 2min
• Flow rate: about 30 l/h, low flow-dependence

• Shaft length: standard 175 mm

• Connection: Modbus RTU with M12 male
• Material: PVC-U, PEEK, stainless steel 1.4571, microporous hydrophilic membrane

• Applications: Fresh water and sea water at 10 µS/cm~50 mS/cm, surfactants are partially tolerated

• Model: CP3

• pH range: 4~12

• Pressure range: 0~0.5 bar, no pressure surges or fluctuations
• Temperature range: 0~ 45℃ (no ice crystals in measurement water)
• Integrated automatic temperature compensation
• Response time: T₉₀ about 2min
• Flow rate: about 30 l/h, low flow-dependence

• Shaft length: standard 175 mm

• Connection: Modbus RTU with M12 male
• Material: PVC-U, PEEK, stainless steel 1.4571, microporous hydrophilic membrane

• Applications: Swimming pool, drinking and seawater, surfactants are partially tolerated; special electrolyte for the use in sea water

• Model: CN1.1

• pH range: 6.5~9

• Pressure range: 0~0.5 bar, no pressure surges or fluctuations
• Temperature range: 0~ 45℃ (no ice crystals in measurement water)
• Integrated automatic temperature compensation
• Response time: T₉₀ about 2min
• Flow rate: about 30 l/h, low flow-dependence

• Shaft length: standard 195 mm

• Connection: Modbus RTU with M12 male
• Material: PVC-U, PEEK, stainless steel 1.4571, microporous membrane

• Applications: Check for the absence of chlorine in water

• Model: AS2 AS3

• pH range: 5~9

• Pressure range: 0~8 bar, no pressure surges or fluctuations
• Temperature range: 0~50℃(AS2), 0~70℃ (AS3)
• Integrated automatic temperature compensation
• Response time: T₉₀ about 30s
• Flow rate: about 30 l/h

• Shaft length: standard 175 mm

• Connection: Modbus RTU with M12 male
• Material: PVC-U (AS2), PEEK (AS3)

• Applications: Fresh water, especially drinking water, up to max. 70℃

Suzhou Delfino Environmental Technology Co., Ltd. is a professional manufacturer of water analysis instruments and sensors, integrating development and production together. Our main products include online, portable water quality analysis instruments. Since its establishment, we have focused on the development and production of water quality analysis instruments.

The monitoring parameters of water quality analyzer instruments mainly include: pH, ORP, dissolved oxygen, conductivity/TDS/salinity, turbidity, SS, Chlorophyll, Blue-green algae, COD, NH4-N, NO3, free chlorine, peracetic acid and so on.

As the rapid growth of the global economy leads to increased consumption and urbanization, solid waste generation has increased significantly, directly affecting the water and wastewater treatment industry. Daruifuno aims to provide solutions to various industries and fields and create a cleaner and healthier drinking water environment for the earth.

Our products mianly application for follows industry：Municipal sewage water treatment plant, industrial wastewater treatment plant, Chemical, Petroleum, Papermaking, Food and drinking, Medicine, Electroplating, PCB plant, fish farm,Lake/river/ocean/groundwater/surface and so on.

Our company was established in 2015, but our predecessor has been committed to the water quality testing industry for more than 10 years. At present, we have our own R&D center with many senior engineers with more than 10 years of experience in the research and development of water quality analyzers and water quality sensors, and are equipped with strict front-line production workers, professional quality inspection personnel and testing equipment to check every process.

As a high-tech enterprise in China, our production is strictly in accordance with ISO9001 from raw material sources to finished equipment. After years of efforts, the company has obtained more than 20 patent certificates, high-tech enterprise certificates, CE, SGS, etc. He has accumulated rich practical experience in the field of water quality testing and has unique insights in the field of water quality testing.

Our company takes "reasonable prices, efficient production time, and good after-sales service" as its purpose and adheres to the business philosophy of "based on quality and creating value for customers". At present, the company is actively exploring the international market and actively promoting its own brands and products. It has been exported to Asia, Southeast Asia, Europe, Africa, and South America, with customers in more than 50 countries and regions around the world. And hope to develop together with customers for mutual benefit with high-quality products and sincere services.