| Sign In | Join Free | My benadorassociates.com |
|
| Sign In | Join Free | My benadorassociates.com |
|
| Categories | Cold Roll Forming Machine |
|---|---|
| Brand Name: | Co-effort |
| Model Number: | GD140 |
| Certification: | CO,CE,FORM A, FORM E |
| Place of Origin: | China |
| MOQ: | 1 set |
| Price: | USD 40000/set |
| Payment Terms: | T/T |
| Supply Ability: | 10 sets for 75 working days, usually have stock |
| Delivery Time: | 75 working days |
| Packaging Details: | Plastic Film and Wooden Case |
| Name: | V Band Clamp Roll Forming Machine |
| Hoop Barrel Clamp Ring Material: | Metal Steel |
| Thickness of Coil: | 0.8mm to 3mm |
| Width of Coil: | 30mm ~ 100mm |
| Material of Rollers: | Cr12Mov |
| Driven Way: | Gear Boxes |
| Color: | As your requirement |
| Driven Motor: | Servo Motor |
| Power: | Around 40KW |
High Speed Stainless Steel V Band Clamp Roll Forming Machine
Application of V Band Clamp Roll Forming Machine
This kind of roll forming machine can use all metal steel as raw
material, through decoiler, straightening, roll forming and cutter
processes, it can produce all kinds of clamps.
Technical Configuration
| No | Items | Technical Requirements |
| 1 | Production Process | De-coiler --- Leveling --- Roll Forming --- Rolling Head --- Cut off |
| 2 | Floor Area | 15×2.5×2(L×W×H)M |
| 3 | Feeding Direction | From Right to Left |
| 4 | Voltage | 415V,50Hz,3 Phase |
| 5 | Air Supply | Flow Rate:0.5m³/min; Pressure: 0-0.7MPa |
| 6 | Hydraulic Fluid | 46# |
| 7 | Gear Oil | 150# |
| 8 | Material of Strip | Stainless Steel |
| 9 | Width of Strip | ≤80mm |
| 10 | Thickness of Strip | ≤2.8mm |
| 11 | Speed | 15 components per minute for diameter 300mm |
| 12 | Length Tolerance | ±0.5mm |
| 13 | Total Power | Around 35 KW |
| Technical Parameters | Type | GD100 |
| Passes | 8 | |
| Driven Method | Independent Gearbox | |
| Forming Passes | Material 45# High precision guide pillar bracket. Visual display is used to adjust the upper and lower rollers. | |
| Passes Pitch | 200mm | |
| Width of Coil | Max. 80mm | |
| Thickness of Coil | Max. 3.0mm | |
| Diameter of Shafts | Φ50mm Material: 42CrMo Hardening treatment | |
Material of Roller | Cr12Mov Hardness: HRC60-62° | |
| Main Driven Servo Motor | 11KW+1.5KW | |
| Rolling and Cutting Device | 1 set |
Control System
Any control cabinet which includes power supply, single or three phase power must be fitted with an isolator which only allows the cabinet to be opened when the isolator is switched to the off position.
The operator controls will be mounted in a location, which best suits, the safe operation of the machine. Controls that are essential to the operation of the machine must be placed outside the guarding.
All PLC programmes and any on-screen instructions must be in the English language.
At least one Emergency stop will be fitted at the operator position and others, as the machine design requires.
FAQ
Q: What’s the diameter range your roll forming machine can do of v band clamps?
A: Min. diameter is 55mm, the max. diameter is 800mm.
Q: What products can this machine produce?
A: Auto V-band Clamps, ring clamps, G coulpings, Flanges, Gaskets, Aircraft Clamps
Q: What is the production speed?
A: Our company adopts servo motor, the speed can be controlled, according to the material thickness and diameter of the product, all of which can meet the requirements of customers.
Equipment performance acceptance
1. Before the equipment is shipped, the designer and the buyer will send the technical personnel to the seller's equipment manufacturing site for equipment acceptance, acceptance according to the agreement and the relevant provisions of the state.
2. If there is any discrepancy or failure to meet the standard requirements of Equipment Acceptance, the seller should take measures to deal with until the requirements are met.
Equipment installation and debugging
1. After the arrival of the goods to the destination, the behalf of the buyer take pictures of the appearance of the goods and check the number of goods, if found inconsistent, please immediately notify the seller to confirm that, if the seller reason, the seller settlement, other reasons negotiation to resolve.
2. Equipment to reach the destination, with the installation conditions, the buyer promptly notify the seller, the seller should be within 5 days to send qualified engineering and technical personnel to the buyer equipment installation site guidance equipment installation, is responsible for equipment commissioning.
3. The seller is responsible for the commissioning of the equipment and instructs the purchaser to try production until the equipment produces a qualified product of various specifications.
4. The hydraulic oil, gear oil, saw blade, cooling water tank, cable and material used in commissioning shall be provided by Buyer.
Yvonne Chan
Jiangsu Co-effort Mechanical&Electrical Technology Co., Ltd.
Wuxi Co-effort Machinery Manufacturing Co.,Ltd.
Office Address: B-613,Tempo Business Building , Yangshe Town, Zhangjiagang City, Jiangsu Province, China 215600
Factory Address: No.11, Shashan Road, Huashi Town, Jiangyin City, Wuxi City, Jiangsu Province, China 214421
Website: www.coldrollforming-machine.com
Tel/Whatsapp/Wechat: +86 13584478980
Email: fancymachinery@outlook.com
|
Locking Ring V Band Clamp Cold Roll Forming Machine
Stainless Steel Band Clamp Flange Roll Forming Machine
Automatic Flange Bucket Hoop Cold Roll Forming Machine
Stainless Steel Aircraft Clamps Cold Roll Forming Machine
Stainless Steel Band Ring Clamp Flanges Coupling Gaskets Roll Forming Machine
Stainless Steel G Coupling Clamp Cold Roll Forming Machine
1mm Thickness Flange Inner Ring Cold Roll Forming Machine
G Coupling Ring Clamps Cold Roll Forming Machine
High Speed Small Diameter Band Clamp Cold Roll Forming Machine
Automatic Cylinder Type Device V Band Clamp Roll Forming Machine
