AC110V DC24V 1/4'' 1/8'' Inch Thread 3 Way 6014 Brass Solenoid Valve

AC110V DC24V 1/4'' 1/8'' Inch Thread 3 Way 6014 Brass Solenoid Valve

The Type 6014 is a direct-acting solenoid valve system with a brass body. For neutral gases and liquids such as compressed air, natural gas, water and hydraulic oil & Technical vacuum.

1. Port Connection: 1/8'', 1/4'', sub-base
2. Body Material: Brass
3. Seal Material: NBR, FKM, PTFE, EPDM
4. Pressure: 0 to 16 Bar
5. Media temperature ranges covering -10°C to +150°C

Bottom plate installation
When installing the bottom plate, please pay attention to the allowable load cycle (5W type 100% continuous work, 8W type 60% intermittent work). The pressure port of the bottom plate is marked P (R), and the output port is marked A (B). Only ports with the same function can be connected together.
If the working pressure is consistent with the label, the 6013 type two-position two-way valve can be installed on the same base plate with the 6014 type two-position three-way valve with circuit function C (not D or T!). Under the premise of considering the function of the valve, the base plate can also be expanded. Several bottom plates can be connected together with the O-shaped connecting clip connected to the pressure port P(R).
Note! The unused, open valve port must be sealed with a cover plate (see accessories).

Main Dimension of 6014 Solenoid Valve:

Technical Data of 6014 Solenoid Valve:

Valve 6014 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with polyamide or with chemically resistant epoxy. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65.

1. Direct-acting and compact valve up to diameter of DN 2.5
2. Vibration-proof, bolted coil system
3. Increased leak-tightness with welded plunger guide tube
4. Energy-saving pulse versions

Brando Factory Production of Brass Solenoid Valves:

As a solenoid valve supplier, BRANDO supplys general purpose solenoid valve for general mediums control. Such as water, air, gas, oil. Offering the cost-effective solution for your projects. Available in brass, stainless steel and PVC material for your projects.

● Size Range: 1/4" to 2" (1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4")
● Voltage: 12 Volt DC, 24 Volt DC, 24 Volt AC, 110 Volt AC, 220 Volt AC
● Pressure: 0-10 bar / 0.3-16 bar
● Temperature: -10℃~180℃
● Material: Brass, Stainless Steel and PVC
● Structure: Direct Acting / Diaphragm / Pilot Operated
● Function: Normally Closed / Normally Open
● Connection Type: Threaded, Flanged, Tri Clamp
● Tolerance: ±10%

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on