Product Details
Company Profile

254SMO Stainless Steel Plates Hot Rolled Alloy 317L For Pulp And Paper Mill

Type 317 Stainless Steel Sheets Astm SA 240 UNS S31703 overview

Alloy 317L is a low-carbon, high molybdenum austenitic stainless steel with a higher nickel alloy content than 316L. Developed to resist the attack of sulfuric acid compounds, this alloy combines good corrosion resistance with excellent mechanical properties and ease of fabrication. These alloys are frequently used for flue gas desulfurization services in fossil-fuel power plants. Compared to other austenitic stainless steels, 317L offers a higher creep strength, stress to rupture, and tensile strength at elevated temperatures.

The higher molybdenum and chromium content of 317L provides excellent corrosion resistance compared to stainless steel grades like 304 or 316, and it resists phosphoric acid, sulfuric acid, and chloride pitting / crevice corrosion. The low carbon content of this grade of 317 also provides resistance to sensitization during welding, which allows it to maintain its corrosion resistance at grain boundaries and prevent intergranular stress corrosion cracking.

While 317L cannot be hardened by heat treatment, it can be cold worked

Features

Good corrosion resistance
Good mechanical properties
Ease of fabrication
Produces stronger welds due to lower carbon content
Resists the attack of sulfuric acid compounds

Produc Forms : Sheet, plate , Coil , Strip .wire , Pipe, Tube ,Bar , Profile, Round, Flat, Square, Hexagonal

Type 317 Stainless Steel Sheets Astm SA 240 UNS S31703 Specification and Dimension Ranges

Specifications

ASTM A240, ASME SA240, BS EN 10028-7, BS EN 10088-2 and BS EN 10088-4

Other Trade Name of 317L Stainless Sheet	SS 317L, SUS 317L, Inox 317L, DIN 1.4438, UNS S31703, AISI 317L, SAE 317L Sheet
Product Type	ASTM A240 317L Sheet, ASTM A240 317L Plate
Specification	ASTM A240 / ASME SA240
Tolerances (width / thickness)	EN 10258/ DIN 59381)
	EN 10151 317L Stainless Steel Strips
	EN 10088 A240 Tp 317L strips
International Standard	ASTM A 480
	ASTM A 959
	ASME IID
	EN ISO 9445
	EN ISO 18286
	EN 10051
	EN 10088-1
	ISO 15510
Sizes	Cold rolled 317L Stainless Steel Plate 0.5-6.4 mm
Sizes	Hot rolled 317L Stainless Steel Plate 3.0–10.0 mm
Thickness	0.1 to 100 mm Thk
Width	10-2500mm
Length	2m, 2.44m, 3m, or as required
Finish	SATIN, 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), No.1 finish hot rolled, 1D, No.4, BA, 8K, hairline, brush, mirror etc.
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard
Manufacturing Shapes	Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate

Dimension Ranges:

Width: 600mm~2030 mm
Thickness: 0.1~120.0 mm
Length: 300~6000 mm , Max 18000 mm

Surface Finish: No.1, 2B, BA, No.3, No.4, No.5, No.8, HL, Etching, SB, Ti-coating,color-coating ,embossing .

Type 317 Stainless Steel Sheets Astm SA 240 UNS S31703 Application

Common Applications of 317L

Flue gas desulfurization systems found in fossil fuel plants
Chemical and Petrochemical Processing
Food and Beverage Processing
Power Generation — condensers
Pulp and Paper Processing
Textiles with acid dyes

Type 317 Stainless Steel Sheets Astm SA 240 UNS S31703 Equivalent

AISI 317L equivalents
DIN 1.4428	AISI TP 317L
DIN X2CrNiMoN18-13-3	SAE TP 317L
DIN X2CrNiMoN18-15-4	JIS SUS317L
AFNOR Z3CND19-15-04	JIS SUS317LTP
SAE 317L	JIS SUS317LTPY
EN X2CrNiMoN18-15-4	JIS SUS317LTB
EN 1.4428	JIS SUS317LFB
UNS S31703	JIS SUSF317L
DIN 1.4438	EN X2CrNiMo18-15-4
DIN X2CrNiMo18-16-4	EN 1.4438
DIN X2CrNiMo18-15-4	UNS S31700
BS 317S12	SS 2367
UNI X2CrNiMo1816	UNE F.3539

Type 317 / 317L Stainless Steel Sheets Astm SA 240 UNS S31703 Technical datasheet

Chemical Composition

The chemical composition of grade 317L stainless steel is outlined in the following table.

Element	Content (%)
Iron, Fe	Balance
Chromium, Cr	18-20
Nickel, Ni	11-15
Molybdenum, Mo	3-4
Manganese, Mn	2
Silicon, Si	1
Phosphorous, P	0.045
Carbon, C	0.03
Sulfur, S	0.03

Mechanical Properties

The mechanical properties of grade 317L stainless steel are displayed in the following table.

Properties	Metric	Imperial
Tensile strength	595 MPa	86300 psi
Yield strength	260 MPa	37700 psi
Modulus of elasticity	200 GPa	29000 ksi
Poisson's ratio	0.27-0.30	0.27-0.30
Elongation at break (in 50 mm)	55%	55%
Hardness, Rockwell B	85	85

Type 317 / 317L Stainless Steel Sheets Astm SA 240 UNS S31703 Products display and Package Details

General Q and A Questions

Q: Would you provide samples For free?

A: Yes . with on stock specification We provide samples For Free . Freight charge collect

Q: What information should i provide to source for the right products ?

A: Material grade, width, thickness, coating and Purchase quantity , Expected lead time ,etc

Q: What are the shipping ports?

A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you

can choose other ports according to your needs.

Q: About product prices?

A: Prices vary from period to period due to cyclical changes in the price of raw materials.

Q: How long does your delivery time take?

A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely

large or special circumstances occur.

Q: Can I visit your location?

A:Of course, we welcome customers from all over the world to visit our factory. However, some

of the plants are not open to the public.

Q: Does the product have quality inspection before loading?

A:Of course, all our products are strictly tested for quality before packaging, and unqualified

products will be destroyed.We provide All original Mill test certificate and support third party inspection.

Q: How to pack the products?

A:The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation

wooden pallet. It can effectively protect products from corrosion during ocean transportation.

Q: What is your working time?

A:In general, our online service time is Beijing time: 8:00-22:00, after 22:00,

we will reply to your inquiry during the next working day.

Product Tags:


*From:	Your email address is incorrect!
*To:	Wuxi Zhongxin Special Steel Co.，Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Stainless Steel Plates
Brand Name:	xinzheng
Model Number:	317L
Certification:	ISO, EN, MTC
Place of Origin:	CHINA
MOQ:	1 MT
Price:	1000-2000 Usd / Mt
Payment Terms:	L/C, D/P, T/T, Western Union, MoneyGram
Supply Ability:	4000 MT PER week
Delivery Time:	5-25 Days
Packaging Details:	Standard seaworthy export package
Standard:	ASME SA 240
Grade:	Type 317 ,grade 317L
Certificate:	Mill MTC ,Third party Inspection
Process:	Cold rolled
Thickness:	2mm- 120mm
Width:	10mm-2030mm
Length:	Max 18000mm
Surface finish:	Brushed ,Mirror , 2B