9.95kw 12 Tons Rice Paddy Dryer Machine Automatic Circulating

12 tons rice dryer equipment supplier in Malasia paddy dryer manufacturer 12 tons

Technical Details

1. High automation (automatic monitor over hot air, grain and moisture, automatic failure alarm); Automatic circulating, discharging and shutdown system;

2. Multi functional furnace (one furnace is designed for many purposes. It uses heating sources such as coal, firewood, crop straw and husk, etc.);

3. Lowest fuel cost,taking husk as the fuel would save a lot of cost toward gas or diesel.

4. Drying cereal shiny bright, no paste, cracking rate is lower than the national standard corn standard 4%. Drying the finished rice, bursting rate below 2%, cracking rate of less than 4%, the color showed a natural state, Eliminate grain pollution.
How Did Dryer Works

• Our dryer need one fuel burner to supply hot air goes into the dryer to remove the moisture on the grains's surface
• After short time drying,grains would be circulating through the elevator,we call it "tempering zoon"to let the moisture inside the kernal to escape
• When the moisture inside the kernal already escaped to the surface,it would drying again,then continue the process,temerping again
• The drying time compare to tempering time would be around 1:5,so there's no additional damage or crack for the raw grains
• Have online moisture meter to test and record the present moisture,would automatically shut down when reach the target
• Lots of heating resources could be choosen,such as diesel,gas,coal,biomass material,each options are determind by clients request

TECHNICAL PARAMETERS

Furnace Burner Options

WORKING DIAGRAM


APPLICANTS:

Within decades of researching and developing, our products have been exported to many countries, such as Algeria, Bangladesh, India, Indonesia, Mynarma, Philippines, Laos, Pakistan, Nigeria, Uganda etc. It has the production capacity to manufacture 500 sets grain dryer machine per year, and can also provide a series of comprehensive solutions such as scheme design, drawing planning, production assembly, and after-sales guidance