2035608 7077114 Fan Blade For Scania Freight Car Engine System

Fan Blade 2035608 7077114 for Scania Freight Car Engine system Fan

The function of the engine cooling fan is to enhance the air velocity and flow through the diffuser to improve the heat dissipation effect of the radiator. The fan is an important component in the engine cooling system. Its performance not only directly affects the heat dissipation efficiency of the radiator, but also affects the normal use and reliability of the engine.

Many parts of a car need to dissipate heat during operation, so there are many places inside the car that need to be installed with fans, including clutch fans, electronically controlled fans, and general cooling fans.

The fan is located between the radiator and the body, is installed on the same shaft as the water pump, and is driven by a pulley on the crankshaft. The fan and the pulley hub are connected by bolts, and the engine crankshaft pulley directly or indirectly drives the fan to rotate.
The tightness of each belt should be adjusted according to regulations. The tightness of the fan belt is too loose, causing the fan pulley speed to decrease, the heat dissipation of the water tank is weakened, the diesel engine working temperature is increased, and the generator output current is reduced or unstable, but the tightness of the fan belt is not as large as possible. The fan belt Too tight will cause excessive load on the bearing, increased wear, and increased power consumption. At the same time, it will also cause the water pump shaft to bend, the belt will elongate and deform, and its life will be shortened. Therefore, the fan belt should be kept tight and properly adjusted if necessary.

Image description

There are two blowing directions for the cooling fan of the engine: blowing and suction. Which blowing method to choose depends on the layout of the engine cooling system. The layout of the engine cooling system needs to be determined according to the space of the engine compartment and the chassis structure of the vehicle body.

      Guangzhou Sub-Group Auto parts Co.,Ltd was established in 2000 and is located in baiyun district, Guangzhou, China. We have China's first-class truck auto parts professional capacity and export trade capacity. We have a strong and professional auto parts research team, professional control of product quality and suitable models. We supply high quality auto parts at the most competitive prices. Since its establishment, Sub-Group Auto parts has been dedicated to the production of all kinds of plastic parts for trucks, with perfect production capacity.

      In 2008, established the foreign trade department of auto parts, mainly operating Volvo, scania, FAW, weichai, cummins, dongfeng, American and Chinese auto parts and engineering machinery parts. We have the ability to develop new products that are not in our catalog, and we will do that in a timely manner and do our best to meet customer needs. Our production and development costs are very reasonable. Please contact us according to your special needs. We are glad to cooperate with you. At the same time, our highly skilled and qualified employees are proud to be a supplier of spare parts to global customers.

       We have a strong sourcing capability in the Chinese market. We fully understand the needs of our customers. We offer high quality products, competitive prices and first class service. We hope to establish good business relations and friendship with you in the near future.

FAQ

1. who are we?
We are based in Guangdong, China, start from 2015,sell to Mid East(30.00%),Central America(20.00%),North America(10.00%),Eastern Asia(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),South America(5.00%),Southeast Asia(5.00%),Eastern Europe(5.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?

Mercedes Benz, Man, Volvo, IVECO, DAF, SCANIA, Renault, Ford
FUSO, UD, NISSAN, HINO, ISUZU
FAW, CAMC, JAC, FOTON, DAYUN, DongFeng

CAT,CAT,Komatsu, Hyundai, Doosan, Hitachi, John Deere, Daewoo, Case, XCMG, Sany

4. why should you buy from us not from other suppliers?
1.Our company has 20 years experience in auto parts development and production. Main projects, China Heavy Truck: Weichai, FAW, Yuchai... and imported trucks: Mercedes-Benz, Volvo, MAN, Scandinavia... and construction machinery: Komatsu, Cummins, etc.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,DAF,DES；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German