5KW Stainless Steel Medicine Fine Powder V Type Mixer 2M3

Stainless Steel Fine Powder V Type Mixer

V shape mixer is widely used for mixture of powder and granule in kinds of industries,such as agriculture,chemical,medicine,feed,coating, cosmetics and so on. The V-type mixer has features of evenly mixing, high efficiency and avoid the materials axxumulation. The fully enclosed structure also guarantee no leakage of materials during mixing process. The V-type mixer is one kind of basic mixing equipment in many industries.

The V type mixer are equipped with one motor and one reducer. The motor will be connect with the reducer with one belt. When the motor is power on, it will drive the running of reducer. Then coupled with the reducer, V-shaped barrel will start running to mix the inside materials up, down, left and right.

Product Installation Instructions

1. Connect the power first, setting the required mixing time, then turn on the switch, the machine begin running.

2. After the mixing, if you found that the position of discharging port is not the best position, you should turn off the power first, and adjust the position of discharging port.

3. Before you use the machine, you should check the appliance, if it is normal; and check the covers of mixing barrels, if the covers are tightly closed.

4. User should clean the machine after the finish of work, especially the barrels, prevent the residual materials.

5. Note that the reducer should be added enough lubricating oil(generally use the 30 # machine oil), and the transmission should be added grease lubricant.

6. Users should maintain the machine once each half of year, change the lubricating oil of reducer, check if the appliance is aging, the appliance should be replaced if it is aging.

7. After you have been using the machine for one year or more, you should make a big maintenance, check the gab between each parts, and appropriately adjust them, so that the machine can keep in good condition.

Product Features

1. Evently mixing, high efficiency and can avoid the materials accumulation

2. Compact structure, operation simple and maintenance convenience.

3. Using stainless steel material, prevent the mixing materials from being polluted.

4. No dead angle, no accumulation of materials, high speed, short mixing time and high uniform mixing.

5. Running steady and lower noise;

6. Equipped with a timing device, it can set mixing time to realize automatic stop.

Technical Parameters

Model	0.18	0.3	0.5	1.0	1.5	2.0	2.5	3.0	4.0	5.0
Productive capacity(kg/batch)	72	120	200	400	1600	800	1000	1200	1600	2000
Model of vacuum pump	W2	W2	W2	W3	W3	W3	W3	W4	W4	W4
Time of raw material fed in(min)	3-5	3-5	4-6	6-9	6-10	8-13	8-15	8-12	10-15	15-20
Mixing time(min)	4-8	6-10	6-10	6-10	6-10	6-10	6-10	8-12	8-12	8-12
Total volume(M3)	0.18	0.3	0.5	1.0	1.5	2.0	2.5	3.0	4.0	5.0
Stirring speed(r/min)	12	12	12	12	12	12	12	10	10	10
Motor power(kw)	1.1	1.1	2.2	4	4	5	7.5	7.5	11	15
Rotating height(mm)	1580	1760	2400	2840	3010	3240	3680	3700	4350	4800
Weight(kg)	280	320	550	950	1020	1600	2040	2300	2800	3250

Technological Process

Production Show

Contact Me

electrical, steam, natural gas or other

Jiangsu Guojin Drying Technology Co.,Ltd. specializes in the research and development and manufacture of drying, mixing, granulating, crushing, conveying, screening and other equipment. It has now become a large-scale enterprise in the drying equipment industry and a designated production enterprise of China Chemical Equipment Corporation. Especially, it has unique advantages in mesh belt type, hollow blade, disc type, rake type, fluidized bed, flash evaporation, airflow, spray, vacuum drying equipment, calcination, etc. Widely used in chemical, pharmaceutical, food, environmental protection, building materials, electronics, feed and other industries. Tens of thousands of users are spread all over the country and sold to more than then countries.

The company is located in Sanhekou Development Zone, Tianning District, Changzhou City, the birthplace of China's drying equipment industry. It is adjacent to Beijing-Shanghai Expressway, Shanghai-Nanjing Railway and Hengshan Crossing of Shanghai-Nanjing Expressway, 5km away from Shanghai in the east, Wuxi and Suzhou in the south, and the Yangtze River in the north.

The company has complete processing equipment. There are several sets of manufacturing equipment such as lifting, welding and cutting. It has excellent product development environment and production environment. The company has adopted advanced management methods and established a perfect quality assurance system.

Our company has established a set of perfect after-sales service system, which tracks and monitors all ex-factory products and the users are satisfied. "work with great care and keep improving" is the company's requirement for emplyees. Facing the increasingly standardized domestic and foreign markets, the company adheres to the corporate philosophy of "open competition, cooperative innovation, balance of interests and common development" and faces up to challenges with the belief of winning.