CE 10 Base-T DC12V 7mA Ethernet Module AJ71E71N3-T

Mitsubishi AJ71E71N3-T ETHERNET MODULE 10BASE-T ETHERNET NEW

Description:

• AJ71E71N3T
• ETHERNET MODULE
• 10BASE-T ETHERNET; REPLACES AJ71E71N-T

Input points: 32 points.
Input voltage: DC12/24V.
Current: 3/7mA.
Response time: 10ms.
Positive / negative sharing.
50 point terminal station.
System program memory for storing system program,
Including management procedures, monitoring procedures, as well as the user program to do the compiler to compile the process of interpretation AJ71E71N33-T.
Read only memory. Manufacturers use, content can not be changed, power does not disappear.
PLC selection with the development of PLC technology, more and more types of PLC products,
Function is becoming more and more perfect, and its application is more and more extensive AJ71E71N3-T.

Different series of different models of PLC has different performance, applicable occasions also have different emphasis,
Price also has a greater difference AJ71E71N3-T. Therefore PLC selection,

Under the premise of meeting the control requirements,
Should consider the best performance to price ratio, a reasonable choice of PLC.
Each scanning process. Focus on the input signal sampling. Focus on the output signal to refresh.
Input refresh process MITSUBISHI AJ71E71N3-T. When the input port is closed,
Program in the implementation phase, the input end of a new state, the new state can not be read.
Only when the program is scanned, the new state is read.
A scan cycle is divided into the input sample, the program execution, the output refresh MITSUBISHI AJ71E71N3-T.

The contents of the component image register are changed with the change of the execution of the program.
The length of the scan cycle is determined by the three.
CPU the speed of executing instructions.
Time of instruction.
Instruction count.
Due to the adoption of centralized sampling MITSUBISHI AJ71E71N3-T.
Centralized output mode.
There exist input / output hysteresis phenomena, i.e., the input / output response delay. Multiple CPU units for A3VTS multiplex system.
Modular: PLC is the basic components of a separate module.
Medium and large PLC used this way. Easy maintenance.
User program storage capacity: it is a measure of how much the user application can store the number of indicators.
Usually in words or K words as units. 16 bit binary number is a word,
Every 1024 words are 1K words. PLC to store instructions and data in words.
General logical operation instructions each account for 1 words. Timer / counter,
Shift instruction accounted for 2 words. Data operation instructions for 2~4.
Relay output interface circuit of PLC
Working process: when the internal circuit output digital signal 1,
There is a current flowing through, the relay coil has a current, and then the normally open contact is closed,
Provide load current and voltage.
When the internal circuit outputs a digital signal 0, there is no current flowing through it,
The relay coil does not have a current, and the normally open contact is broken off,
A current or voltage that is disconnected from the load.
It is through the output interface circuit to the internal digital circuit into a signal to make the load action or not action.
10BASE-T.
When communicating in the PLC network of MITSUBISHI,
There is no sense of difference and discontinuity in the network,
Can carry on the remote monitoring, modification, debugging and other work of data communication and program,
Without taking into account the level and type of network.
MELSECNET/H and CC-Link use the way of loop communication,
Periodically automatically send and receive messages,
Does not require specialized data communication procedures,
Simple parameters can be set.
MELSECNET/H and CC-Link are used to transmit and receivve the broadcast mode,
This can be done on the network data sharing AJ71E71N3-T.
For the use of Ethernet, MELSECNET/H, CC-Link network,
Can set the network parameters and various functions, simple and convenient in the Developer GX software screen.

FX1N Series Programmable Logic Controllers

Product introduction

MORE INFORMATION

DELIVERY

Logistic partners UPS, FedEx and DHL

International delivery available

Same day dispatch from group stock

WARRANTY

All parts new are covered by Shenzhen Viyork 12 month warranty

RETURNS

No hassle returns policy

Dedicated customer support team

PAYMENT

Trade credit

We understand that credit is a necessary part of business and offer credit agreements on request, subject to status.

Payment options

We accept Bank transfers and the following methods of payment:

Western Union PayPal VISA

Pls contact us:
Company: Shenzhen Viyork Technology CO.,LTD.
Cotact:Miss Liu
Moblie/WhatsApp: 0086-13826534820
Email: shenzhenviyork@163.com
Skype:live:.cid.ba9401e01ca235c2

Shenzhen Viyork technology co., LTD. engage in professionally sales industrial automation (DCS, PLC, Redundant fault-tolerant control system,Robotic system) spare parts.

We can offer these advantage products: Mitsubishi, Yaskawa,Pansonic, Ovation, Emerson,Honeywell,Allen - Bradley, Schneider, Siemens, ABB, GE Fanuc, Rosemount and Yokogawa transmitter and so on.

The efforts of all the employees in the company and the support of the customers and the same profession,Our business rapidly expand throughout China and around the world, quickly became the industrial automation rising star, here, thanks to the customers long-term support, We will focus more for your attention.

Our advantage produts:

And so no....

Any inquiries,pls let me know.

I will give you the best price.