ZX3030A AC Program Controlled Three Phase Standard Power Source Long Life

Introduction

ZX3030A three-phase program-controlled standard power source adopts with the integrated structure of meter and source, full digital closed-loop standard source technology, and uses a series of advanced devices such as embedded system, large TFT screen, CPLD chip and high precision A/D, D/A. It can be widely used in electric energy metering industry, electrical laboratory and other related departments, and is easy to carry to the field.

Features

1. Using touchable screen and film button.

2. Embedded high-level standard power watt-hour meter and digital closed-loop feedback based on it. Other parameters such as voltage, current, frequency can also be used as standard.

3. current limit protection, voltage short circuit protection, current open circuit protection and other functions.

4. Within the allowable output range of the instrument, users can arbitrarily set the rated voltage and current gears of three-phase voltage and current.

5. There are abundant current and power factor test points, which make it easy to configure various calibration schemes.

6. It can check all kinds of single-phase, three-phase and active and reactive watt-hour meters.

7. The large amount of data storage makes it easy to query the validation data.

8. With RS232 serial port, it is convenient for computer control and upgrading software.

Parameters

1) AC Phase Voltage Output

A. Adjustment fineness: 0.01% RG

B. Resolution: 6-bit significant digits

C. Accuracy: better than ±0.05%RG

D. Stability: better than ±0.01% RG/1 min

E. Distortion: better than 0.1% (non-capacitive load)

F. Output power: rated 20VA per phase

G. Full load adjustment rate: less than ±0.01% RG

H. Output range: 10V-500V

I. Range settings: 57.7V, 100V, 220V, 380V, automatic switching.

2) AC current output

A. Adjustment fineness: 0.01% RG

B. Accuracy: better than ±0.05%RG

C. Resolution: 6-bit significant digits

D. Stability: better than ±0.02% RG/1 min

E. Distortion: better than 0.1%

F. Output power: 20VA per phase.

G. Full load adjustment rate: less than ±0.01% RG

H. Output range: 0.5mA-24A

I. Range setting: 0.2A, 1A, 5A, 20A, automatic switching (current 0-100A customized)

3) Power Output

Accuracy: better than 0.05% RG

B. Stability: better than 0.01%/1 min.

C. Resolution: 6 bits significant digits ( active power, reactive power, apparent power)

4) Power factor

A. Adjustment range: - 1~ 0 ~+1;

B. Resolution: 0.00001;

C. Accuracy: 0.0005.

5) phase

A. Adjustment range: 0-359.99 degrees

B. Resolution: 0.001 °

C. Accuracy: ±0.02 °

6) frequency

Adjustment range: 40Hz-70Hz

B. Resolution: 0.001 Hz

C. Accuracy: ±0.002Hz

7) Harmonics: 2-51 harmonics can be output accurately.

About GDZX
 

Wuhan GDZX Power Equipment Co.,Ltd. is located in Wuhan, China, covering an area of 50 acres, with 6,000 m2 of factory space and 12,000 m2 of office buildings. We specialize in power testing equipment, engineering services, equipment commissioning, operations and maintenance testing, calibration, energy-saving and environmental protection equipment, and power sales. Our integrated solutions provide complete high-voltage testing and electrical inspection services to various power users.

Guodian Zhongxing integrates R&D, production, sales and service, and provides complete solutions for high voltage testing and electrical testing services for all types of power users. It is a well-known brand of electrical testing equipment in China.

The six major categories of products independently developed and produced by the company are mainly used in the handover test, preventive test, condition maintenance and intelligent substation detection of various voltage levels of power equipment in all links of the power system from power generation, transmission and distribution to distribution, factory inspection and annual inspection of primary equipment. Specifically divided into: high voltage/ultra-high voltage/ultra-high voltage AC and DC test equipment series, mobile power test intelligent integrated system, transmission and transformation test instrument, power metering/standard series, SF6 gas/oil test series, battery test series. All products have passed the inspection or type test of the "National Power Industry Electrical Equipment Quality Inspection and Testing Center"; and obtained the calibration certificate of the "National High Voltage Metering Station".