Cisco ASR 9010 Chassis ASR-9010-DC ASR-9010 DC Chassis 8 Linecard Slots

ASR-9010-DC specifications

Height: 36.75 in. (933.45 mm) (21 RU)

Width: 17.38 in. (441.45 mm)

Depth:

● With doors: 29.03 in. (737.4 mm)

● Without doors: 28.24 in. (717.3 mm)

Weight:

● 155.6 lb (70.73 kg) (chassis with PEM)

231.6 lb (105.27 kg) (fully loaded, excluding linecards and power modules) – RSP, two v2 fan trays, PEMs

2 RSPs

2 fan trays

2 PEMs (either DC or AC)

1 fan filter

Fabric redundancy

Fan redundancy

Feed redundancy

Power-supply redundancy

RSP redundancy

Software redundancy

19-in. default

21- and 23-in. adapters available

Note: Minimum 17.75-in. opening between posts is needed for proper operation

Yes

Note: Doors not recommended in enclosed cabinets

One per RSP:

● Active/active nonblocking operation mode in dual-RSP redundant configuration

● Fully redundant in dual-RSP redundant configuration

● Built-in service-intelligence and traffic-prioritization capability

Two fan trays:

● 12 high-efficiency fans per tray

● Variable-speed fans for optimal thermal performance

● No single point of failure

Pay-as-you-grow power for future scalability, available in AC and DC.

Multiple power module types:

● 6 kW and 3 kW AC power modules

● 4.4 kW and 2.1 kW DC power modules

Note: Mixing of AC and DC modules is not supported

● AC: N+N redundancy

● DC: N+1 redundancy

● Power module redundancy

● A/B Feed redundancy

● PEM redundancy

No power zone restrictions

Fully load-sharing power infrastructure

Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum)

Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum)

ASR 9006: 23 to 131ºF (-5 to 55ºC)

ASR 9010: 23 to 122ºF (-5 to 50ºC)

Cisco ASR 9010 Routers are designed to meet:

● SR-3580: NEBS Criteria Levels (Level 3)

● GR-1089-CORE: NEBS EMC and Safety

● GR-63-CORE: NEBS Physical Protection

● VZ.TPR.9205: Verizon TEEER

Cisco ASR 9010 Routers are designed to meet:

● EN300 386: Telecommunications Network Equipment (EMC)

● ETSI 300 019 Storage Class 1.1

● ETSI 300 019 Transportation Class 2.3

● ETSI 300 019 Stationary Use Class 3.1

Cisco ASR 9010 Routers are designed to meet:

● FCC Class 47CFR15 A

● ICES 003 Class A

● AS/NZS CISRP22 Class A

● CISPR 22 (EN55022) Class A

● VCCI Class A

● BSMI Class A

● IEC/EN 61000-3-12: Power Line Harmonics

● IEC/EN 61000-3-11: Voltage Fluctuations and Flicker

● EN55022: Information Technology Equipment (Emissions)

● EN 50121-4: Railway EMC

Cisco ASR 9010 Routers are designed to meet:

● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)

● IEC/EN-61000-4-3: Radiated Immunity (10V/m)

● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)

● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)

● IEC/EN-61000-4-5: Signal Surge Ports (1kV)

● IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)

● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)

● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)

● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations

● EN55024: Information Technology Equipment (Immunity)

● EN50082-1/EN-61000-6-1: Generic Immunity Standard

● EN 50121-4: Railway EMC

Cisco ASR 9010 Routers are designed to meet:

● UL/CSA/IEC/EN 60950-1

● IEC/EN 60825 Laser Safety

● ACA TS001

● AS/NZS 60950

● FDA Code of Federal Regulations Laser Safety